Bissoy.com
Doctors Medicines MCQs Q&A

Manifold _____________ is eliminated due to the fuel being injected into or close to the cylinder and need not flow through the manifold.

Manifold _____________ is eliminated due to the fuel being injected into or close to the cylinder and need not flow through the manifold. Correct Answer wetting

Generally, manifold wetting is eliminated due to the fuel being injected into or close to the cylinder and need not flow through the manifold and not heating or cooling.

Related Questions

“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
The fuel is injected into the inlet manifold of each cylinder at _____________ timing.
A six cylinder, four-stroke diesel engine develops 125 kW at 3000 rpm. Its brake specific fuel consumption is 200gm/kW h. Calculate the quantity of fuel to be injected per cycle per cylinder. Specific gravity of the fuel may be taken as 0.85.
With reference to 'fuel cells' in which hydrogen-rich fuel and oxygen are used to generate electricity, consider the following statements: 1. If pure hydrogen is used as a fuel, the fuel cell emits heat and water as by-products. 2. Fuel cells can be used for powering buildings and not for small devices like laptop computers. 3. Fuel cells produce electricity in the form of Alternating Current (AC) Which of the statements given above is/are correct?
With reference to 'fuel cells' in which hydrogen rich fuel and oxygen are used to generate electricity. Consider the following statements.
1. If pure hydrogen is used as a fuel, the fuel cell emits heat and water as by products.
2. Fuel cells can be used for powering buildings and not for small devices like laptop, computers.
3. Fuel cells produce electricity in the form of Alternating Current (AC).
Which of the statements given above is/are correct?
The curved surface area of cylinder A is 8% more than the curved surface area of cylinder B. If the height of cylinder A is 4% less than the height of cylinder B, then the volume of cylinder A is what percentage more/less than the volume of cylinder B?
The curved surface area of cylinder X is 45% of the curved surface area of cylinder Y. If the volume of cylinder X is 27% of the volume of cylinder Y, then the height of cylinder X is what percentage of the height of cylinder Y?
The pie chart given below shows the fuel consumption by five vehicles V1, V2, V3, V4 and V5. In a month total fuel consumption by all five vehicles is 720 litre. Fuel consumption of a particular vehicle is shown in terms of degree with respect to the total fuel consumption by all these five vehicles. J1 = Difference between the fuel consumption of V4 and V5. J2 = Difference between the fuel consumption of V1 and V2. What is the value of J2 – J1?
Determine the corrections or otherwise of the following Assertion and reason : Assertion : Total fuel volume of aircraft is divided into mission or used fuel, reserve fuel and trapped fuel. Reason: Depending on type of aircraft, fuel fraction for each category will be different. and are true and is the correct reason for b) Both and are true but is not the correct reason for c) is true but is false d) is false but is true