Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider socket API on a Linux machine that supports connected UDP sockets. A connected UDP socket is a UDP socket on which connect function has already been called. Which of the following statements is/are CORRECT? I. A connected UDP socket can be used to communicate with multiple peers simultaneously. II. A process can successfully call connect function again for an already connected UDP socket.
If knuckle joint is to fail by crushing failure of pin in fork, then determine the diameter of knuckle pin when 50kN axial tensile force act on rods. Given: Max allowable compressive stress=25N/mm², thickness of each eye of fork=25mm.
The diameter of knuckle pin in a knuckle joint is usually taken as (where d = Diameter of the rod)
Which of the following are components of the knuckle joint assembly?  I) Knuckle pin II) Single eye III) Double-eye
There is a numeric lock which has a 3-digit PIN. The PIN contains digits 1 to 7. There is no repetition of digits. The digits in the PIN from left to right are in decreasing order. Any two digits in the PIN differ by at least 2. How many maximum attempts does one need to find out the PIN with certainty?
Which one of the following socket API functions converts an unconnected active TCP socket into a passive socket?
The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity $${\omega _1}$$ rad/s in the clockwise direction and the link OB turns with angular velocity $${\omega _2}$$ rad/s in the anticlockwise direction, then the rubbing velocity at the pin joint O is (where r = Radius of the pin at O)
The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity $${\omega _1}$$ rad/s in the clockwise direction and the link OB turns with angular velocity $${\omega _2}$$ rad/s in the clockwise direction, then the rubbing velocity at the pin joint O is (where r = Radius of the pin at O)
Practical dividing line between a ductile and brittle materials is suggested, when the ultimate elongation is about 5%. Generally, larger the knuckle radius, stronger is the corner torus section of a head. The knuckle radius provided should be less than __________ of the head.
An Internal combustion engine has a connecting rod of mass 2 kg and the distance between the centre of crank and centre of gudgeon pin is 25 cm. The Center of Gravity lies at a point 10 cm from the gudgeon pin along the line of centres. The radius of gyration of this system about an axis through the Center of Gravity perpendicular to the plane of rotation is 11 cm. If two masses are used instead of the connecting rod, one at the gudgeon pin and other at the crank pin. What will be the new radius of gyration?