Bissoy.com
Doctors Medicines MCQs Q&A

The world’s tallest and longest cable stayed bridge is located in?

The world’s tallest and longest cable stayed bridge is located in? Correct Answer France

The world’s tallest and longest cables stayed bridge is located in France and the French bridge is considered to be an engineering feat since some of the bridge pillars rise gracefully to a height of more than 300m and the bridge is located outside the French town of milliance and is 2.46km long and the bridge designed by the famous British architecture sir norman Foster, is currently the world’s tallest and longest cable stayed bridge and described by many as an astounding engineering feat.

Related Questions

When we compare the half bridge converter and full bridge converter 1. The maximum collector current of a full bridge is only double that of the half bridge 2. Full bridge uses 4-power switches instead of 2, as in the double bridge. 3. Output power of a full bridge is twice that of a half bridge with the same input voltage and current. When of the above statements are correct?
Anand, Bharath, Manas and Prakash have invested in the ratio of 4 : 7 : 9 : 5 in a business. Anand stayed in the business for 8 months, Bharath stayed for 6 months, Manas stayed for 9 months and Prakash stayed for 12 months. If the total profit earned is Rs. 43,000, what is the difference between the shares of profits of Anand and Prakash?
S1: Instantly the full load yanked Gordy towards the side of the bridge.
P: But the pull of the cable was too much.
Q: He could hardly feel the cable, slipping through his fingers, ripping off his gloves, and streaking over the railing like an escaping snake.
R: It smashed his hands hard against the top of the railing, causing a split - second feeling of fierce pain followed by numbness.
S: He held on to the cable; it had been hard work lifting it, and he did not want to have to start over again.
S6: Feeling a sharp burning sensation where the cable was speeding between his things, Gordy rose on tiptoe and as he did, the slithering coil of cable tightened around his left foot and yanked him over the railing.

The Proper sequence should be:
Four friends A, B, C and D need to cross a bridge. A maximum two persons can cross it at a time. It is night and they just have one lamp. Persons that cross the bridge must carry the lamp to find the way. A pair must walk together at the speed of slower person. After crossing the bridge, the person having faster speed in the pair will return with the lamp each time to accompany another person in the group. Finally, the lamp has to be returned at the original place and the person who returns the lamp has to cross the bridge again without lamp. To cross the bridge, the time taken by them is as follows: A :1 minute, B : 2 minutes, C : 7 minutes and D : 10 minutes. What is the total minimum time required by all the friends to cross the bridge?
A boat is on the one side of a bridge and the other boat is on the other side of the bridge. The bridge is 36 meter above the river surface. The angles of depression of both the boats from the bridge point on the bridge are complementary to each other and the angle of depression of first boat from the bridge is tan-1(1/3), then what is the distance between both the boats?
A cow was standing on a bridge, 5m away from the middle of the bridge. A train was coming towards the bridge from the ends nearest to the cow. Seeing this cow ran towards the the train and managed to escape when the train was 2m away from bridge. If it had run in the opposite direction, it would hit by the train 2m before the end of the bridge. What is the lenght of the bridge in meters assuming the speed of the train is 4 times that of cow ?
You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?
You have been given the task of installing cables for an Ethernet network in your office. The building is an older one, and-you have limited work space. In addition, the network cable will have to share the existing conduit with telephone cable, and cable segments will be up to 135 meters in length. Which cable is best suited to this installation?
A network administrator is connecting hosts A and B directly through their Ethernet interfaces, as shown in the illustration. Ping attempts between the hosts are unsuccessful. What can be done to provide connectivity between the hosts?

Subnetting mcq question image

1. A crossover cable should be used in place of the straight-through cable.
2. A rollover cable should be used in place of the straight-through cable.
3. The subnet masks should be set to 255.255.255.192.
4. A default gateway needs to be set on each host.
5. The subnet masks should be set to 255.255.255.0.
The country’s “first cable-stayed” Indian Railways bridge – the magnificent Anji Khad Bridge will be soon constructed in which of the following UTs?