Bissoy.com
Doctors Medicines MCQs Q&A

The stress distribution in concrete member which is away from the anchorage and in the region of the anchorage will be ____________

The stress distribution in concrete member which is away from the anchorage and in the region of the anchorage will be ____________ Correct Answer Uniform

The stress distribution in concrete member which is away from the anchorage and in the region of the anchorage will be uniform reasonably and complex respectively this is stated by st.venant’s principle, a product of the correction factor in each direction is used if a group of anchorage are closely spaced in two directions in case of computation of compressive stresses.

Related Questions

The average age of a family having three members is 40 years. The smallest member of the family is 18 years old. The difference between the age of the oldest family member and the age of the second oldest family member is 6 more than the difference between the age of the second oldest member and age of youngest member of the family. Quantity I: 25 years hence, what will be the average of the age of smallest member and that of oldest member of the family? Quantity II: What is the age of the oldest member of the family?   
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Permeability in concrete is studied towards providing for, or guarding against, which of the following features? 1. The penetration by materials in solution may adversely affect the durability of concrete; moreover, aggressive liquids 'attack' the concrete. 2. In the case of reinforced concrete, ingress of moisture and air will result in corrosion of steel leading to an increase in the volume of steel, resulting in cracking and swilling of the concrete cover. 3. The moisture penetration depends on permeability and if the concrete can become saturated with water it is less vulnerable to frost action.
The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.
Consider the following statements; 1) In a reinforced concrete member subjected to flexure, the externally applied moment is resisted by an internal couple formed by steel and concrete and their magnitudes vary with the applied moment, while the lever arm of the internal couple remains constant 2) In a prestressed concrete. Member, the external moment is resisted by an internal couple, but it is the lever arm that changes with the loading conditions and the stress in steel remain practically constant Which of the above statements is/are correct?
Which of the following statements regarding stress related factors is/are true and false?
1. Burnout Stress Syndrome (BOSS) is a debilirating psychological condition brought about by unrelieved work stress.
2. 'Good' and 'bad' stresses are also referred to as 'Distress' and 'Eustress' respectively.
3. It is natural and healthy to maintain optimal level of stress.
4. Rustout Stress Syndrome (ROSS) is indicative of stress overload.
5. Anxiety is a state of emotional tension characterised by Apprehension, fearfulness, and psychic pain.
The influence of shape of aggregate in strength and workability of concrete are given below in statements S1, S2, S3 and S4. Which of the statements are correct? S1: Rounded aggregate produces concrete with high workability and low strength. S2: Angular aggregate produces concrete with high workability and low strength. S3: Rounded aggregate produces concrete with low workability and high strength. S4: Angular aggregate produces concrete with low workability and high strength.
Examine the following statements :
i) Factor of safety for steel should be based on its yield stress,
ii) Factor of safety for steel should be based on its ultimate stress,
iii) Factor of safety for concrete should be based on its yield stress,
iv) Factor of safety for concrete should be based on its ultimate stress.
The correct statements are
Which of the following statements are correct? 1. Stress Isobar can be prepared using Boussinesq’s stress distribution theory. 2. Equivalent point load method yields accurate results. 3. Newmark’s method relates the vertical stress with the help of influence chart. 4. Westergaard’s method helps in determination of stress distribution for layered soils. Select the correct answer using the codes given below:
A geometrical discontinuity in a body, such as a hole or a notch result in nonuniform distribution of stress at the vicinity of discontinuity. At the region near the discontinuity, the local stress will be higher than normal stress distribution.