The tendons in the pretensioning system are tensioned between ___________

The tendons in the pretensioning system are tensioned between ___________ Correct Answer Rigid anchorages

In the prestressing system, the tendons are first tensioned between rigid anchorage blocks cast on the ground or a column or a unit mould type pretensioning bed, prior to the casting of concrete in the moulds.
Bissoy MCQ

Related Questions

A post tensioned cable of beam 10m long is initially tensioned to a stress of 1000n/mm2 at one end, slope is 1 in 24 tendons curved at each end , area is 600mm2, Es is 210kn/mm2, coefficient of friction between duct and cable is 0.55, friction coefficient for wave effect is 0.0015perm. During anchorage, if there is a slip 3mm at the jacking end, calculate final force?
The concrete members which are prestressed by providing the tensioned tendons are termed as ___________
The pre and post tensioned members with bonded tendons bond stress between ____________
The concrete members which are prestressed by providing the tensioned tendons are termed as ____________
The British code for structural concrete recommends design values of ultimate creep strain of pretensioning is ___________
Hoyer’s system of pretensioning can be done for beams.
Which is one of the systems used for pretensioning?
Which of the following losses of prestress occurs only in pretensioning and not in post-tensioning?
In Lee-McCall system, the prestressing tendons are in the form of ___________
After the tensioning operation, the space between the tendons and the ducts are ___________