The concrete members which are prestressed by providing the tensioned tendons are termed as ____________

The concrete members which are prestressed by providing the tensioned tendons are termed as ____________ Correct Answer Internally prestressed members

The concrete members which are prestressed by providing the tensioned tendons are termed as internally prestressed members due to bending moment in the beam is developed and the bending in the beam results in change of unit stresses, unit strains in the tendons.
Bissoy MCQ

Related Questions

The concrete members which are prestressed by providing the tensioned tendons are termed as ___________
Which of the following statements is/are true about the advantages of prestressed concrete structure? A. In the prestressed concrete structure, the deflection of beams is considerably reduced. B. Prestressing decreases cracks in concrete under all stages of loading. C. Prestressed concrete requires only 1/3 rd of the concrete required for R.C.C.
A post tensioned cable of beam 10m long is initially tensioned to a stress of 1000n/mm2 at one end, slope is 1 in 24 tendons curved at each end , area is 600mm2, Es is 210kn/mm2, coefficient of friction between duct and cable is 0.55, friction coefficient for wave effect is 0.0015perm. During anchorage, if there is a slip 3mm at the jacking end, calculate final force?
Permeability in concrete is studied towards providing for, or guarding against, which of the following features? 1. The penetration by materials in solution may adversely affect the durability of concrete; moreover, aggressive liquids 'attack' the concrete. 2. In the case of reinforced concrete, ingress of moisture and air will result in corrosion of steel leading to an increase in the volume of steel, resulting in cracking and swilling of the concrete cover. 3. The moisture penetration depends on permeability and if the concrete can become saturated with water it is less vulnerable to frost action.
A prestressed concrete beam, 200mm wide and 300mm deep is prestressed with wires (area is 320mm2) located at a constant eccentricity of 50mm, initial stress of 1000n/mm2, span is 10m. Calculate loss of stress due to friction and slip anchorage of post tensioned beam?(Es = 210kn/mm2, Ec = 35kn/mm2).
For a prestressed beam, if all the tendons of are tensioned simultaneously in a smooth duct having zero coefficient of friction then which of the following statement comes true regarding loss recorded in prestress while post tensioning?
The pre and post tensioned members with bonded tendons bond stress between ____________
The failure of prestressed concrete member without additional un tensioned reinforcement, to that of plain concrete is?
A post tensioned concrete beam, 100mm wide and 400mm deep is prestressed by three cables, each with a cross sectional area of 50mm2, initial stress of 1200n/mm2. Calculate the stress in concrete at level of steel?
In a club of 80 members, 10 members play none of the games Tennis, Badminton and Cricket. 30 members play exactly one of these three games and 30 members play exactly two of these games. 45 members play at least one of the games among Tennis and Badminton, whereas 18 members play both Tennis and Badminton. The number of Cricket playing members is: