In Lee-McCall system, the prestressing tendons are in the form of ___________

In Lee-McCall system, the prestressing tendons are in the form of ___________ Correct Answer Steel bars

In Lee-McCall system, the prestressing tendons are in the form of high tensile alloy steel bars and the bar size ranges from 12-40mm diameter and after tensioning, the bars are anchored by special threaded nuts which bear against a distribution plate.
Bissoy MCQ

Related Questions

In circular prestressing members, the tendons are supplied in form of ___________
The stress-strain characteristics of steel used as prestressing tendons are necessary for __________
A precast pretensioned beam of rectangular section has a breadth of 100mm and depth of 200mm and the beam with an effective span of 5mm is prestressed by tendon with their centroidal coinciding with the bottom kern and the initial force in the tendons is 150kn. Find prestressing force?
The prestressing tendons are not grouted in the case of ____________
A rectangular prestressed beam 150 mm wide and 300mm deep is used over a effective span of 10m and the cable with zero eccentricity at the supports, linearly varying to 50mm at the centre carries an effective prestressing force of 500kn(Z=225×104). Evaluate stress due to prestressing?
Find ultimate shear strength (check it for safe against shear failure) if vu is 27.75kn, Loss ratio is 0.8, prestressing force is 182000, area is 31400, breadth is 50 where height is 320, prestressing force is 1.7, fcp = 4.65, ft is 1.7?
Check for deflection due to prestressing force if given data is Prestressing force is 182×103 eccentricity of cable is 105, Length of the cable is 1000, elastic modulus of concrete is 34×103, Moment of inertia is 3200×105?
Calculate vertical prestressing force if wires of 5mm diameter with an initial stress of 1000n/mm2 are available for circumferential winding and Freyssinet cables made up of 12 wires of 8mm diameter stressed to 1200n/mm2 are to be used for vertical prestressing?
The tendons in the pretensioning system are tensioned between ___________
Dischinger explained the use of unbounded tendons in the construction of ___________