The stress-strain characteristics of steel used as prestressing tendons are necessary for __________

The stress-strain characteristics of steel used as prestressing tendons are necessary for __________ Correct Answer Flexural computation

Knowledge of the stress-strain characteristics of steel that is used as prestressing tendons is necessary for flexural strength computations by the strain compatibility method and a typical short- term design stress-strain curve for concrete recommended in the British & Indian standard codes.
Bissoy MCQ

Related Questions

In circular prestressing members, the tendons are supplied in form of ___________
In Lee-McCall system, the prestressing tendons are in the form of ___________
A precast pretensioned beam of rectangular section has a breadth of 100mm and depth of 200mm and the beam with an effective span of 5mm is prestressed by tendon with their centroidal coinciding with the bottom kern and the initial force in the tendons is 150kn. Find prestressing force?
The prestressing tendons are not grouted in the case of ____________
A rectangular prestressed beam 150 mm wide and 300mm deep is used over a effective span of 10m and the cable with zero eccentricity at the supports, linearly varying to 50mm at the centre carries an effective prestressing force of 500kn(Z=225×104). Evaluate stress due to prestressing?
Calculate vertical prestressing force if wires of 5mm diameter with an initial stress of 1000n/mm2 are available for circumferential winding and Freyssinet cables made up of 12 wires of 8mm diameter stressed to 1200n/mm2 are to be used for vertical prestressing?
The system in which high tensile alloy steel bars (silica manganese steel) are used as pre-stressing tendons, is known as
Find ultimate shear strength (check it for safe against shear failure) if vu is 27.75kn, Loss ratio is 0.8, prestressing force is 182000, area is 31400, breadth is 50 where height is 320, prestressing force is 1.7, fcp = 4.65, ft is 1.7?
Check for deflection due to prestressing force if given data is Prestressing force is 182×103 eccentricity of cable is 105, Length of the cable is 1000, elastic modulus of concrete is 34×103, Moment of inertia is 3200×105?
A steel ball (density ρsteel = 7200 kg/m3) is placed in an upward moving liquid AI (density ρal = 2360 kg/m3, viscosity μAl = 1 × 10-3 Pa.s and Reynolds number = 5 × 105). The force (F) exerted on the steel ball is expressed as F = fπR2(ρAl V2/2)
where, f is friction factor (= 0.2), v is the velocity of liquid AI and R is the radius of steel ball.
The force exerted on the steel ball is