Bissoy.com
Doctors Medicines MCQs Q&A

Determine the working stress in the factor of safety is 3 and ultimate load is what 127.32N?

Determine the working stress in the factor of safety is 3 and ultimate load is what 127.32N? Correct Answer 42 N/m2

We know that working stress is the ratio of ultimate load to factor of safety Given F.O.S = 3 & W = 127.32N Working stress = 127.32/3 = 42.44 N/m2.

Related Questions

Examine the following statements :
i) Factor of safety for steel should be based on its yield stress,
ii) Factor of safety for steel should be based on its ultimate stress,
iii) Factor of safety for concrete should be based on its yield stress,
iv) Factor of safety for concrete should be based on its ultimate stress.
The correct statements are
The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.
Consider the following statement: 1. Initial load tests and routine load tests are carried out on test piles and working Piles, respectively. 2. In a pile load test, the allowable load can be taken equal to half the ultimate load at which the total settlement amounts to one-tenth of the pile diameter. 3. In a pile load test, the allowable load can be taken equal to two-thirds of the total toad which causes a plastic settlement of 6 mm. Which of the above statements are correct?
In the question below, are given a statement followed by three courses of actions numbered I, II and III. On the basis of the information given, you have to assume everything in the statement to be true, and then decide which of the following suggested courses of actions logically follow(s) for pursuing. Statement: Starting October, all new cars will have pedestrian safety features, including new design of the bonnet, to reduce impact on pedestrians during accidents. Advanced safety features are needed in all vehicles in India as vehicle safety cannot be confined to luxury vehicles only. Around 1.5 lakh people are killed in road accidents every year in the country, nearly 60% of them are pedestrians.  Courses of action: I. The government has set a target to reduce the number of road deaths by half in the next two years. The ministry of road transport and highways has been issuing new safety standards for the automobiles along with eliminating the black spots on national highways.  II. By next month, all new cars will have pedestrian safety feature, including new design of the bonnet, to reduce impact on pedestrians during accidents.  III. Ministry of road transport and Highways is planning to implement all safety features in vehicles with active support of vehicle manufacturers. Electronic stability control (ESC) and autonomous emergency braking (AEB) will be incorporated in new vehicles by 2022.
A, B, C, D, K, L, M and O are researchers and are working in three different institutes, X, Y and Z. They are working in three different areas namely, solar energy, sustainable development, and rainwater harvesting for agricultural purpose. Not less than two or more than three researchers are working in the same area and not more than three of them are working the same institute. K is researching in the sustainable development in the institute Y with B who is doing research in rainwater harvesting. A and M are doing research in the same area but not in sustainable development and are not working in the institute Y. C is researching in solar energy in the institute Z, only with D who is working in sustainable development. L is researching in rainwater harvesting area and not working in the institute where A works. O is not doing research in the solar energy. Choose option for answering question, In which of the institute/institutes at least one researcher is working in the area of solar energy ?
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
What is the total number of employees in the company? Which of the following option is sufficient alone to find the answer? A) In the company, employees like either tea or coffee or cold drink. Out of the total employees, 25% like tea and 40% like coffee. Out of remaining employees, 20% like cold drink and remaining employees don’t like any of these drinks. B) Out of total employees 18% working in the marketing departments, 35% working in IT departments. From the remaining employees 25% working in HR departments and 45% working in content departments and remaining 141 are working in other departments. C) Employees working in the company is form state X, Y and Z. 20% of employees working in the company is from state X and from remaining 60% employees is from state Z and the remaining employees is from the state Y. D) 60% of the employees in the company are married and remaining employees are unmarried. The ratio of male and female unmarried employees is 4 : 5 and ratio of married male and female employees is 3 : 4.
Consider the following statements: 1. The working stress design is based on explicit consideration of the various conditions under which the structure may cease to fulfill its intended function. 2. In the case of working stress design, the structure will directly take into consideration the various relevant modes of failure. 3. In the working stress method, regulatory bodies or classification societies usually specify the value of the allowable stress as some fraction of the mechanical properties of materials Which of the above statements is/are correct?
Read the passage carefully and select the best answer to each question out of the given four alternatives.
What is Gandhian philosophy? It is the religious and social ideas adopted and developed by Gandhi, first during his period in South Africa from 1893 to 1914, and later of course in India. These ideas have been further developed by later "Gandhians", most notably, in India by, Vinoba Bhave and Jayaprakash Narayan. Outside of India some of the work of, for example, Martin Luther King Jr. can also be viewed in this light. Understanding the universe to be an organic whole, the philosophy exists on several planes - the spiritual or religious, moral, political, economic, social, individual and collective. The spiritual or religious element, and God, is at its core. Human nature is regarded as fundamentally virtuous. All individuals are believed to be capable of high moral development, and of reform. The twin cardinal principles of Gandhi's thought are truth and nonviolence. It should be remembered that the English word "truth" is an imperfect translation of the Sanskrit, "satya", and "non-violence", an even more imperfect translation of "ahimsa". Derived from "sat" - "that which exists" - "satya" contains a dimension of meaning not usually associated by English speakers with the word "truth". There are other variations, too, which we need not go into here. For Gandhi, truth is the relative truth of truthfulness in word and deed, and the absolute truth - the Ultimate Reality. This ultimate truth is God (as God is also Truth) and morality - the moral laws and code - its basis. Ahimsa, far from meaning mere peacefulness or the absence of overt violence, is understood by Gandhi to denote active love - the pole opposite of violence, or "Himsa", in every sense. The ultimate station Gandhi assigns non violence stems from two main points. First, if according to the Divine Reality all life is one, then all violence committed towards another is violence towards oneself, towards the collective, whole self, and thus "self"-destructive and counter to the universal law of life, which is love. Second, Gandhi believed that ahimsa is the most powerful force in existence. Had himsa been superior to ahimsa, humankind would long ago have succeeded in destroying itself. The human race certainly could not have progressed as far as it has, even if universal justice remains far off the horizon. From both viewpoints, non violence or love is regarded as the highest law of humankind.
What are the twin cardinal principles of Gandhis thought?
Read the passage carefully and select the best answer to each question out of the given four alternatives.
What is Gandhian philosophy? It is the religious and social ideas adopted and developed by Gandhi, first during his period in South Africa from 1893 to 1914, and later of course in India. These ideas have been further developed by later "Gandhians", most notably, in India by, Vinoba Bhave and Jayaprakash Narayan. Outside of India some of the work of, for example, Martin Luther King Jr. can also be viewed in this light. Understanding the universe to be an organic whole, the philosophy exists on several planes - the spiritual or religious, moral, political, economic, social, individual and collective. The spiritual or religious element, and God, is at its core. Human nature is regarded as fundamentally virtuous. All individuals are believed to be capable of high moral development, and of reform. The twin cardinal principles of Gandhi's thought are truth and nonviolence. It should be remembered that the English word "truth" is an imperfect translation of the Sanskrit, "satya", and "non-violence", an even more imperfect translation of "ahimsa". Derived from "sat" - "that which exists" - "satya" contains a dimension of meaning not usually associated by English speakers with the word "truth". There are other variations, too, which we need not go into here. For Gandhi, truth is the relative truth of truthfulness in word and deed, and the absolute truth - the Ultimate Reality. This ultimate truth is God (as God is also Truth) and morality - the moral laws and code - its basis. Ahimsa, far from meaning mere peacefulness or the absence of overt violence, is understood by Gandhi to denote active love - the pole opposite of violence, or "Himsa", in every sense. The ultimate station Gandhi assigns non violence stems from two main points. First, if according to the Divine Reality all life is one, then all violence committed towards another is violence towards oneself, towards the collective, whole self, and thus "self"-destructive and counter to the universal law of life, which is love. Second, Gandhi believed that ahimsa is the most powerful force in existence. Had himsa been superior to ahimsa, humankind would long ago have succeeded in destroying itself. The human race certainly could not have progressed as far as it has, even if universal justice remains far off the horizon. From both viewpoints, non violence or love is regarded as the highest law of humankind.
According to Gandhiji, truth complies to which of the following?