Bissoy.com
Doctors Medicines MCQs Q&A

A solid uniform metal bar is hanging vertically from its upper end. Its elongation will be _________

A solid uniform metal bar is hanging vertically from its upper end. Its elongation will be _________ Correct Answer Proportional to L and inversely proportional to D2

Elongation = WL / 2AE = 4WL / 2πD2E α L/D2.

Related Questions

When a bar of length '$$l$$' and diameter 'd' is rigidly fixed at the upper end and hanging freely, then the total elongation produced in the bar due to its own weight is (where w = Weight per unit volume of the bar)
A solid metal bat of uniform diameter D and length L is hung vertically from a ceiling. If the density of the material of the bar is 1 and the modulus of elasticity is E, then the total elongation of the bar due to its own weight will be ____________
The length of a conical bar is $$l$$, diameter of base is d and weight per unit volume is w. It is fixes at its upper end and hanging freely. The elongation of the bar under the action of its own weight will be
The total elongation produced in a bar of uniform section hanging vertically downwards due to its own weight is equal to that produced by a weight
A load of 100N falls through a height of 2cm onto a collar rigidly attached to the lower end of a vertical bar 1.5m long and of 105cm2 cross- sectional area. The upper end of the vertical bar is fixed. What is the maximum instantaneous elongation in the vertical bar if E = 200GPa?
“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
A load of 100N falls through a height of 2cm onto a collar rigidly attached to the lower end of a vertical bar 1.5m long and of 105cm2 cross- sectional area. The upper end of the vertical bar is fixed. What is the maximum instantaneous stress induced in the vertical bar if E = 200GPa?
A load of 100N falls through a height of 2cm onto a collar rigidly attached to the lower end of a vertical bar 1.5m long and of 105cm2 cross- sectional area. The upper end of the vertical bar is fixed. What is the strain energy stored in the vertical bar if E = 200GPa?
A steel and a copper bar are joined end to end. The area of the steel bar is half the area of the copper bar. Their lengths are equal to 10cm each. Temperature of free ends of steel & copper rod are 0°C & 100°C respectively. KS = 50 J/smK & KC =384 J/smK. Calculate equivalent thermal conductivity of the combined bar.
A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is