Bissoy.com
Doctors Medicines MCQs Q&A

A single phase full converter has discontinues load current. The converter is supplying a DC shunt motor (R-L-E) load. When the current falls to zero

A single phase full converter has discontinues load current. The converter is supplying a DC shunt motor (R-L-E) load. When the current falls to zero Correct Answer none of the devices conduct

The current falls to zero when the L has discharged completely and the devices are not yet fired.

Related Questions

A single phase full converter has discontinues load current. The converter is supplying a dc shunt motor (R-L-E) load. When the current falls to zero the output voltage is
Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from AC source to the DC load. Consider E = 120 V, R = 0.4 Ω.
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from the DC load to the AC source. Consider E = 120 V, R = 0.4 Ω, L = 2 Henry.
A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.
A three-phase full converter is driving a DC motor. If a continues current of Im amperes is flowing through the motor load, then find the rms value of supply current drawn by the converter to drive the motor.
Which of the following statements are correct for dc shunt motor? 1. Speed of a shunt motor is sufficiently constant 2. For the same current input, its starting torque is not high as that of series motor 3. The motor can be directly coupled to a load such as fan whose torque increases with speed Select the correct answer using the code given below.
A single-phase full converter B-2 type connection has a RLE type of motor load connected. The minimum requirement to turn-on the device is
A single phase full converter feeds power to a RLE load with R = 6 Ω and E = 60 V. Find the average value of the load current when the supply voltage is 230 V rms AC and a firing angle = 50°.
A half controlled single-phase bridge converter is supplying an R-L load. The triggering angle is α. If the load current is continuous, the duration for which the freewheeling of the load takes place in a half cycle of the input voltage is