Bissoy.com
Doctors Medicines MCQs Q&A

A single phase full converter has discontinues load current. The converter is supplying a dc shunt motor (R-L-E) load. When the current falls to zero the output voltage is

A single phase full converter has discontinues load current. The converter is supplying a dc shunt motor (R-L-E) load. When the current falls to zero the output voltage is Correct Answer E

As the load is RLE output voltage will always exists even if the current goes to zero due to E.

Related Questions

A single phase full converter has discontinues load current. The converter is supplying a DC shunt motor (R-L-E) load. When the current falls to zero
Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from AC source to the DC load. Consider E = 120 V, R = 0.4 Ω.
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from the DC load to the AC source. Consider E = 120 V, R = 0.4 Ω, L = 2 Henry.
Consider the following statements: 1. The voltage developed across the OFF switches of the half-bridge converter is the maximum dc-link voltage. 2. In the full-bridge converter, the voltage across the primary of the transformer is the dc link voltage. 3. The voltage developed across the OFF switches of the full-bridge converter is half the maximum dc-link voltage. Which of the above statements are correct?
A single phase full converter feeds power to a RLE load with R = 6 Ω and E = 60 V. Find the average value of the load current when the supply voltage is 230 V rms AC and a firing angle = 50°.
A single-phase semi-converter circuit is supplying power to a motor load. The average value of load voltage is 176.72 V and the rms value is 219.3 V. Find the VRF (voltage ripple factor).
A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.
A three-phase full converter is driving a DC motor. If a continues current of Im amperes is flowing through the motor load, then find the rms value of supply current drawn by the converter to drive the motor.