Bissoy.com
Doctors Medicines MCQs Q&A

The nominal size of a product is 30 mm. The acceptable industrial limits are from 29.98 mm to 30.02 mm. After manufacturing, the quality engineer finds the lower limit of the manufactured product to be 29.00 mm while the upper limit is 30.01 mm. What can you infer from the given scenario?

The nominal size of a product is 30 mm. The acceptable industrial limits are from 29.98 mm to 30.02 mm. After manufacturing, the quality engineer finds the lower limit of the manufactured product to be 29.00 mm while the upper limit is 30.01 mm. What can you infer from the given scenario? Correct Answer There is a failure because the lower limit is below 29.98 mm

The manufactured product fails to comply with the industrial standards of the product. The lower limit of the manufactured product has to be within the range of 29.98 mm to 30 mm. The upper limit of the manufactured product has no issues because 30.01 mm lies between 30 mm and 30.02 mm.

Related Questions

The table given below shows the number of cars manufactured by 7 different companies in a month. Companies Number of Cars C1 2600 C2 3200 C3 4200 C4 1800 C5 2200 C6 2800 C7 3500 Which of the following statement(s) is/are correct? I. Ratio of number of cars manufactured by company C4 to the number of cars manufactured by company C6 is 9 : 14 respectively. Il. Average number of cars manufactured by per company is 2900. 
Four political parties W, X, Y and Z decided to set up a joint candidate for the coming parliamentary elections. The formula agreed by them was the acceptance of a candidate by most-of the parties. Four aspiring candidates, A, B, C and D approached the parties for their tickets. A was acceptable to W but not to Z. B was acceptable to Y but not to X. C was acceptable to W and Y. D was acceptable to W and X. When candidate B was preferred by W and Z, candidate C was preferred by X and Z, and candidate A was acceptable to X but not to Y, who got the ticket ?
Four political W, X, Y, and Z decided to set up a joint candidate for the coming parliamentary elections. The formula agreed by them was the acceptance of a candidate of the most of the parties. For aspiring candidates A, B, C and D approached the parties for their ticket. 1) A was acceptable to W but not Z 2) B was acceptable to Y but not X 3) C was acceptable to W and Y 4) D was acceptable to W and X When candidate B was preferred by W and Z, candidate C was preferred by X and Z and candidate A was acceptable to X but not Y, who got the ticket
Study the following information carefully to answer the question given below. Following are the qualifications and conditions for certain posts in a "XYZ" company. The candidate must: a) be an engineering graduate with at least 70% marks. b) be not less than 21 years and not more than 26 years of age as of 01/04/2018. c) have passed the written test with at least 60% of marks. d) be willing to pay a deposit of Rs. 2.5 lakh, to be refunded on completion of probation & training. If the candidate satisfies (a)-(d) he/she would be referred to as Engineer. However, if the candidate satisfies all the above, except: (i) at (a), has appeared for final semester exam; result yet to be declared; has 75% average marks up to the seventh semester; would be referred as Project-Engineer. (ii) at (a), has done diploma in engineering with 75% of marks, would be referred as Asst. Engineer. (iii) at (d), is willing to pay Rs. 1.5 lakh as a security deposit, would be referred to as Engineer-Trainee. (iv) at (b), even if age is above 26 years as of 1/4/18, but with 3 years of experience, would be referred as a Senior-Engineer. Pranita has completed her B. E. in electronics with 71% of the marks. She also has cleared the written tests with 75% of the marks. She is 22 years old as of May 2018. She is willing to pay a security deposit of Rs. 1.5 lakh. For which position will she be referred?
Study the following information carefully to answer the question given below. Following are the qualifications and conditions for certain posts in a “XYZ” company, The candidate must: a) be an engineering graduate with atleast 70% marks. b) be not less than 21 yrs and not more than 26 years of age as on 01/04/2018 c) have passed the written test with at least 60% of marks d) be willing to pay a deposit of Rs. 2.5 lakhs, to be refunded on completion of probation & training If the candidate is satisfied with (a)-(e) would be referred as Engineer. (i) at (a) but appeared final semester exam result yet to be declared with 75% average marks up to seventh semester be referred as Project-Engineer (ii) at (a) but has done diploma in engineering with 75% of marks be referred as Asst. Engineer (iii) at (d) be willing to pay Rs. 1.5 lakhs as security deposit he referred as Engineer-Trainee (iv) at (b) even if age above 26 years age as on 1/4/18 but with 3 years of experience be referred as Senior-Engineer Fatima is 28 years now in July 2018. She has completed B-E in information technology with 86% of marks. She has passed written test with 73% of marks. She is willing to pay Rs. 2.5 Lakhs of security deposit. She also had an experience of 3 years in the relevant field. For which position she will be referred? 
The table below shows the frequency distribution of a certain mass data. Class Interval 0-25 25-50 50-75 75-100 100-125 Frequency 2 7 6 3 8 As a tradition, the lower limit is always included in the class interval (CI); and the upper limit is removed from every CI, except the last. For the given data, x is the upper limit of the model class and y is the lower limit of the median class. Then what is the value of (2x - 5y)?
The pic chart given below shows the number of bulbs manufactured by a company in 6 years. The number of bulbs manufactured in a particular years is shows as a percentage of total number of bulbs manufactured in 6 years. If the total number of bulbs manufactured in 6 years is 100000, then what is the difference in the number of bulbs manufactured in year Y3 and Y5?
Given below are three quantities named A, B and C. Based on the given information, determine the relation among the three quantities. A shopkeeper bought two products X and Y from a company. He bought product X for Rs. 3060 and sold it to the customer earning a profit of 20%, while he sold the product Y to a customer for Rs. 4160, thereby earning a profit of 30%. Quantity A: If the company earned a profit of 20% on the product X, what is the manufacturing cost of product X? Quantity B: If the company earned a profit of Rs. 600 on the product Y, what is the manufacturing cost of product Y? Quantity C: What is the difference between the total price paid by the customers and the total manufacturing cost of the products X and Y?
Read the passage carefully and select the best answer to each question out of the given four alternatives. One should consciously engage in activities that will nourish your soul. Just as we nourish the body, we need to nurture the soul to connect to the creative power ofthe universe and to manifest joy in our lives. Often, we forget to address the soul, lost as we are in a jungle of material and sensual pleasures. But the more youembrace what feeds your soul, the happier you become. So if you want to enjoy the abundance of life, engage in what enriches your soul. Nurturing the soul is allabout finding calm amidst chaos. There are a number of practices that empower people towards this end including silent contemplation, various forms of meditation,yoga and tai chi However, the rigor and discipline involved in the pursuit of such practices often seems to discourage people. Add to this, the temptations of thematerial world that leave little time and motivation for anyone to pursue the spiritual path. Poet Walt Whitman declared: “Whatever satisfies the soul is truth”. Thegood news is that simple, everyday activities can also nutrify the soul — like spending time in the midst of nature, dancing in the rain or just putting thoughts onpaper. Do whatever is calming and pleases you. Creative pursuits are particularly appealing as inside each one of us, there is an artist craving for release andawaiting an opportunity for expression. One of the ways to indulge the artist within is to get started with the practice of any one or more of the creative art formssuch as music, singing, dancing, acting, drawing, painting, sculpting, poetry, fiction or essay writing. When you engage in such soul nourishing activities, all thought and energy gets focused toward goal accomplishment. At this point, you will find that even unknownforces of the universe are conniving to assist you in your amateurish but sincere attempts. As you progress, you are motivated to do better. You touch and access afaculty, a part of you that you never knew existed. Your inner artist is unleashed, baring the beauty of your soul that has found a fond medium of expression. Forinstance, a sculptors soul is seen in his artwork; a musicians in his compositions; an actors in his acting, a painters in his paintings and so on. It is immaterialwhether your effort is an immaculate artwork or just a clumsy attempt by a layperson. The idea is to try, be inspired and to create giving free rein to the mind. AsMichelangelo remarked: “I saw the angel in the marble and carved until I set him free”! What can you infer from Michelangelos statement - "I saw the angel in the marble and carved until I set him free"?
A 70 kg tea powder contains mixture from two qualities. Some amount of quality 1 tea powder is added so that ratio of quality 1 to quality 2 becomes 5 : 4. What is the extra amount of of quality 2 to be added so that, quality 2 becomes double the amount of quality 1 in new mixture. Given: current quality 1 exceeds quality 2 in old mixture by 10 kg?