Bissoy.com
Doctors Medicines MCQs Q&A

Calculate the output voltage for LM314 regulator. The current IADJ is very small in the order of 100µA. (Assume VREF=1.25v)

Calculate the output voltage for LM314 regulator. The current IADJ is very small in the order of 100µA. (Assume VREF=1.25v) Correct Answer 17.17v

The output voltage, VO =VREF+(IADJ×R2)=1.25Vin× +( 100µA×3kΩ )= 16.875 +0.3. => VO=17.17v.

Related Questions

Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
What are the conditions to be satisfied by a voltage source for using it in switching regulator. i. It must supply the required output power and the losses associated with the switching regulator ii. It must be large enough to supply sufficient dynamic range line and load variations iii. It must be sufficient high to meet the minimum requirement of the regulator system to be designed iv. It may be required to store energy for a specified amount of time during power failure especially if the system is designed for a computer power supply.
Compute the input voltage of 7805c voltage regulator with a current source that will deliver a 0.725A current to 65Ω, 10w load. (Assume reference voltage =5v)
When an electric current coil of a wattmeter is connected to the electric current path R and the voltage coil is connected between the electric current R path and the neutral side of the balanced three phase supply, it shows 10 kW. The line voltage along the phase sequence RYB is 400 V. The current drawn by the current path is 54 A. What is the new reading of the wattmeter if the voltage coil is connected between the lines B and the Y paths, even if the electric current coil is continuously present in the line R?
For a Zener diode shunt regulator, the source current is IS, the Zener diode current is IZ and the load current is IL. The source voltage is VS, Zener voltage is VZ and load voltage is VL. The load resistance is RL. What is the correct option for the safe operation of the diode?
A Zener voltage regulator will cease to act as a voltage regulator if Zener current becomes ___________
In the Zener controlled series regulator shown below, find the current through the Zener diode. Given that the Zener diode breakdown voltage is 5V, the source voltage is 15V, the output voltage is 10V, R4 = 2kΩ, β=99, R1=2kΩ.
In the figure below, the voltage V1 ranges from 15 to 35V. The load current is 20mA. The diode knee current is 2 mA, the breakdown voltage is 5V and power rating is 200 mW. Calculate the range of R2 for the circuit to behave properly as a regulator.
The accompanying image shows a large cube made of dark and white small sugar cubes. Small cubes of the diagonally arranged row of the bottom surface of the large cube, small cubes of the row with one face on the right-hand surface of the large cube, small cubes of the row with one face on the front surface of the large cube, and small cubes of the column with one face on the top of large cube surface are all dark. Select the number of small white cubes of the large cube.
Some small cubes of same height 7 cm but variable length and width are put inside a large cuboid of height 21 cm. Length and width of cuboid is 32 cm and 24 cm, respectively. Small cubes are put such that cubes at the bottom most layer is of similar base area; second layer contains all the cubes of similar base area and third layer have all the cubes of similar base area. Which of the following statement(s) given below is / are TRUE? A: If side of each small cubes at bottom most layer is 8 cm, then maximum number of small cubes that can be put at bottom most layer is 12. B: If maximum of 48 cubes can be put at second layer, then side of each cube at second layer is 6 cm. C: If side of each small cubes at third layer is 1.6 cm, then maximum number of small cubes that can be put at third layer is 300.