Bissoy.com
Doctors Medicines MCQs Q&A

The change in output voltage for the corresponding change in load current in a 7805 IC regulator is defined as

The change in output voltage for the corresponding change in load current in a 7805 IC regulator is defined as Correct Answer Load regulation

Load regulation is defined as the change in output voltage for a change in load current and is also expressed in millivolts or as a percentage of output voltage.

Related Questions

Find the difference between output current having a load of 100Ω and 120Ω for 7805 IC regulator. Consider the following specification: Voltage across the load = 5v; Voltage across the internal resistor= 350mv.
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
For a Zener diode shunt regulator, the source current is IS, the Zener diode current is IZ and the load current is IL. The source voltage is VS, Zener voltage is VZ and load voltage is VL. The load resistance is RL. What is the correct option for the safe operation of the diode?
What are the conditions to be satisfied by a voltage source for using it in switching regulator. i. It must supply the required output power and the losses associated with the switching regulator ii. It must be large enough to supply sufficient dynamic range line and load variations iii. It must be sufficient high to meet the minimum requirement of the regulator system to be designed iv. It may be required to store energy for a specified amount of time during power failure especially if the system is designed for a computer power supply.
What is the maximum value of the input voltage to the IC 7805 voltage regulator?
In the circuit given below, let VEB(ON)=0.8v and ß=16. Calculate the output current coming from 7805 IC and collector current coming from transistor Q1 for a load of 5Ω.
Which of the following statements are true? a. As load increases armature current decreases, regardless of excitation. b. For under and over excited motors, power factor tends to approach zero with increase in load c. With normal excitation when load is increased, change in armature current is greater than in power factor which tends to become increasingly leading. d. Both with under and over excitation, change in power factor is greater than in armature current with increase in load.
Compute the input voltage of 7805c voltage regulator with a current source that will deliver a 0.725A current to 65Ω, 10w load. (Assume reference voltage =5v)
A dc power supply has no-load voltage of 30v,and a full-load voltage of 25v at full-load current of 1A.Its output resistance & load regulation ,respectively are
When an electric current coil of a wattmeter is connected to the electric current path R and the voltage coil is connected between the electric current R path and the neutral side of the balanced three phase supply, it shows 10 kW. The line voltage along the phase sequence RYB is 400 V. The current drawn by the current path is 54 A. What is the new reading of the wattmeter if the voltage coil is connected between the lines B and the Y paths, even if the electric current coil is continuously present in the line R?