In butt joint when one strap is used the thickness varies between _______ to ________ (T is the thickness of plate to be connected).

In butt joint when one strap is used the thickness varies between _______ to ________ (T is the thickness of plate to be connected). Correct Answer T, 1.125T

In a butt joint, edges of the plates to be connected are butted against each other and the joint between them is covered by butt-plates or butt-straps on one or both sides. At least two rows of rivets, one in each connected plate, are necessary to make the joint.
Bissoy MCQ

Related Questions

In single riveted, double strap butt joint, what will be that possible thickness of the cover plate/strap ts, if the thickness of the main plate is t?
In butt joint when two straps are used the thickness varies between _______ to ________ (T is the thickness of plate to be connected).
Calculate the thickness of the strap required in longitudinal butt joint if pitch of the rivets is 150mm and diameter of rivets 30mm. Also thickness of plate is 20mm.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². If width of plate=80mm and diameter of rivets 10mm, then pitch will be?
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate efficiency of the joint.
Why is double cover butt joint preferred over single cover butt joint or lap joint?
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as _______ double cover butt joint.
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the shear resistance of 1 rivet along A-A.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the tensile strength of rivet along A-A.