Related Questions

A conical spring is to be designed with base diameter 100 mm and another end diameter 50 mm and pitch of spring is 5 mm to a height of 80 mm. How many revolutions are there in spring?
A spring of spring constant 5×103N/m is stretched initially by 5cm from the unstretched position. Then the work done to stretch is further by another 5cm is?
A closely coiled helical spring is acted upon by an axial force. The maximum shear stress developed in the spring is $$\tau $$. The half of the length of the spring if cut off and the remaining spring is acted upon by the same axial force. The maximum shear stress in the spring in new condition will be
The length of a rectangle is twice its breadth if its length is decreased by 5cm and breadth is increased by 5cm, the area of the rectangle is increased by 75 sq cm. Find the length of the rectangle.
When a closely-coiled helical spring of mean diameter (D) is subjected to an axial load (W), the deflection of the spring ($$\delta $$) is given by (where d = Diameter of spring wire, n = No. of turns of the spring and C = Modulus of rigidity for the spring material)
An open coiled helical compression spring 'A' of mean diameter 50 mm is subjected to an axial load ‘W’. Another spring 'B' of mean diameter 25 mm is similar to spring 'A' in all respects. The deflection of spring 'B' will be __________ as compared to spring 'A'.
A multiple-threaded screw has a pitch of screw 4mm and if the screw is made to 5 revolutions the screw will advances to 40 mm. What type of screw is it?
In order to prepare Lithium nitride, air is passed gently over a reactor. Suppose that Nitrogen diffuse to a length 5cm before getting reacted with Lithium. Nitrogen reacts with lithium quickly so that partial pressure of Nitrogen at that point is 0. Reactor is a cylinder of length 10cm and diameter 2cm. Assume air to be a mixture of Nitrogen and Oxygen only. The temperature is 298K and total pressure 1atm. Diffusivity of N2 in O2 is 2*10-5m2/s. Calculate the Molar flux (mol/m2.s) of N2 at a distance of 2.5cm from the top with respect to an observer moving with twice the mass average velocity a direction towards the liquid surface. (R=8.205*10-5m3atmK-1mol-1). Assume z=0 at the top of the reactor.
Number of revolutions are 10 and the pitch is 2mm. Find the length of spring.
A spring of force constant 800N/m has an extension of 5cm. The work done in extending it from 5cm to 15cm is?