Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements: 1. Integral controller improves steady state response 2. By use of proportional controller, maximum peak overshoot decreases 3. Type and order of system reduces by one for derivative controller 4. Integral controller makes the system less stable in transient state due to oscillations Select the correct answer using the codes given below:
Which one of the following four addresses is NOT EXACTLY same as the one given below? Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (i) Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (ii) Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (iii) Cabrematta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (iv) Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia
Which one of the following four addresses is NOT EXACTLY same as the one given below?  Kedrick Shaw 72 Glenwood Drive, Thornton, NSW 2322, Australia (i)  Kedrick Shaw  72 Glenwood Drive,  Thornton, NSW 2322, Australia (ii) Kedrick Shaw  72 Glenwood Drive,  Thornton, NSW 2322, Australia (iii) Kedrick Shaw  72 Glenwood Drive,  Thornton, NSW 2322, Australia (iv) Kedrick Shaw  72 Glemwood Drive,  Thornton, NSW 2322, Australia
Consider a disk system having 60 cylinders. Disk requests are received by a disk drive for cylinders 10, 22, 20, 2, 40, 6, and 38, in that order. Assuming the disk head is currently at cylinder 20, what is the time taken to satisfy all the requests if it takes 2 milliseconds to move from one cylinder to an adjacent one and Shortest Seek Time First (SSTF) algorithm is used ?
While working with MS-DOS, which command is used to compare the disk in drive A with the disk in drive B, specifying to compare only first side of each disk, and only the first 8 sectors of each track?
On a non-pipelined sequential processor, a program segment, which is a part of the interrupt service routine, is given to transfer 500 bytes from an I/O device to memory.     Initialize the address register     Initialize the count to 500 LOOP: Load a byte from device     Store in memory at address given by address register     Increment the address register     Decrement the count     If count! = 0 go to LOOP Assume that each statement in this program is equivalent to a machine instruction which takes one clock cycle to execute if it is a non-load/store instruction. The load-store instructions take two clock cycles to execute. The designer of the system also has an alternate approach of using the DMA controller to implement the same transfer. The DMA controller requires 20 clock cycles for initialization and other overheads. Each DMA transfer cycle takes two clock cycles to transfer one byte of data from the device to the memory. What is the approximate speedup when the DMA controller based design is used in place of the interrupt driven program based input-output?
After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the:
You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?
Disk requests come to a disk driver for cylinders in the order 10, 22, 20, 2, 40, 6 and 38, at a time when the disk drive is reading from cylinder 20. The seek time is 6 ms/cylinder. The total seek time, if the disk arm scheduling algorithms is first-come-first-served is
You are the administrator of Windows 2000 Server computer. Your computer has a span volume that consists of areas on three physical hard disks on the server. The three disks support hot swapping. You regularly backup the span volume by using windows backup. One of the disk fail, you replace the disk with a new un-partitioned disk. You want to recover the span volume and disk data as soon as possible. What should you do?