Bissoy.com
Doctors Medicines MCQs Q&A

In CE configuration, if the voltage drop across 6kΩ resistor connected in the collector circuit is 6V. Find the value of IB when β=50.

In CE configuration, if the voltage drop across 6kΩ resistor connected in the collector circuit is 6V. Find the value of IB when β=50. Correct Answer 0.02mA

IC=V across RL/RL=5V/5KΩ=1mA IB=IC/β=1/50=0.02MA.

Related Questions

The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are)
Two resistors are in series: a 5.6 kΩ resistor and a 4.7 kΩ resistor. The voltage drop across the 5.6 kΩ resistor is 10 V. The voltage across the 4.7 kΩ resistor is
In CB configuration, the value of α=0.98A. A voltage drop of 4.9V is obtained across the resistor of 5KΩ when connected in collector circuit. Find the base current.
In CE configuration, if the voltage drop across 5kΩ resistor connected in the collector circuit is 5V. Find the value of IB when β=50.
Obtain the collector voltage, for collector resistor (RC) =5.6kΩ, IE=1.664mA and VCC=10v for single input unbalanced output differential amplifier
The collector supply voltage for a CE configured transistor is 10V. The resistance RL=800Ω. The voltage drop across RL is 0.8V. Find the value of collector emitter voltage.
Consider a capacitor and resistor connected in series to a sinusoidal voltage source. The voltage across the capacitor lags the voltage across the resistor by an angle θ degrees. What is the value of θ?
কমন গ্রামিটার বর্তনীতে একটি n-p-n ট্রানজিস্টরের সংগ্রাহকে 8 V ব্যাটারী সংযুক্ত আছে। সংগ্রাহক Rt রোধের দুই প্রান্তে বিভব পতন 0.5 V হলে বেস কারেন্ট নির্ণয় কর। [দেওয়া আছে Rt = 800 Ω এবং বর্তনীর α =0.96)(An n-p-n transistor is connected in common emitter configuration in which the collector supply is 8 V. Determine the base current, if the voltage drops across the resistance Re of the collector circuit is 0.5 V. [Rt = 800Ω and α = 0.96])
What is the source voltage applied across a loop containing a resistor of 1000 ohm and capacitor of 15 microfarads in series when a current of 0.02 ampere flows across the circuit? Given that the voltage drop across capacitor is 5 Volts?
What is the source voltage applied across a loop containing a resistor of 100 ohm and capacitor of 15 microfarads in series when a current of 0.05 ampere flows across the circuit? Given that the voltage drop across capacitor is 2 Volts?