Bissoy.com
Doctors Medicines MCQs Q&A

Consider a voltage amplifier having a frequency response of the low-pass STC type with a dc gain of 60 dB and a 3-dB frequency of 1000 Hz. Then the gain db at

Consider a voltage amplifier having a frequency response of the low-pass STC type with a dc gain of 60 dB and a 3-dB frequency of 1000 Hz. Then the gain db at Correct Answer f = 1Mhz is 0 db

Use standard formulas for frequency response and voltage gain.

Related Questions

cascading two identical amplifier stages, each having a low-pass STC frequency response with a 3dB frequency f1, results in an overall amplifier with a 3dB frequency given by
Seven people A, B, C, D, E, F and G live on separate floors of a 7-floor building. Ground floor is numbered 1, first floor is numbered. 2 and so on until the topmost floor is numbered 7. Each one of these having a different cars-Cadillac, Ambassador, Fiat, Maruti, Mercedes, Bedford and Fargo but not necessarily in the same order. Only three people live above the floor on which A lives. Only one person lives between A and the one having a car Cadillac. F lives immediately below the one having a car Bedford. The one having a car Bedford lives on an even-numbered floor. Only three people live between the ones having a car Cadillac and Maruti. E lives immediately above C. E is not having a car Maruti. Only two people live between B and the one having a car Fargo. The one having a car Fargo lives below the floor on which B lives. The one having a car Fiat does not live immediately above D or immediately below B. D does not live immediately above or immediately below A. G does not have a car Ambassador. Question : How many people live between the floors on which D and the one having a car Bedford ?
A 741-Type OP-amp has a gain-bandwith product of 1MHz. A non-inverting amplifier using this opamp & having a voltage gain of 20db will exhibit -3db bandwidth of
If, Fhp(u, v)=F(u, v) – Flp(u, v) and Flp(u, v) = Hlp(u, v)F(u, v), where F(u, v) is the image in frequency domain with Fhp(u, v) its highpass filtered version, Flp(u, v) its lowpass filtered component and Hlp(u, v) the transfer function of a lowpass filter. Then, unsharp masking can be implemented directly in frequency domain by using a filter. Which of the following is the required filter?
A voltage amplifier has a voltage gain of 100. What will be gain at 3dB cut-off frequencies?
An inverting amplifier with nominal gain of −20 V/V employs an op amp having a dc gain of 104 and a unity-gain frequency of 106 Hz. What is the 3-dB frequency f3dB of the closed-loop amplifier?
What is the total voltage gain of a high frequency response of differential amplifier if the gain of first stage is 10dB, gain of the second stage is 20dB and gain of third stage is 30dB?
What is the total voltage gain of a high frequency response of multistage amplifier if the gain of first stage is 14dB, gain of the second stage is 12dB and gain of third stage is 24dB?
An amplifier of gain 1000 is made into a feedback amplifier by feeding 9.9% of its output voltage in series with the input opposing. If fL = 20 Hz and fH = 200 kHz for the amplifier without feedback, then due to the feedback
An op amp having a 106-dB gain at dc and a single-pole frequency response with ft = 2 MHz is used to design a non-inverting amplifier with nominal dc gain of 100. The 3-dB frequency of the closed-loop gain is