Bissoy.com
Doctors Medicines MCQs Q&A

For a given transistor, the thermal resistance is 8°C/W and for the ambient temperature TA is 27°C. If the transistor dissipates 3W of power, calculate the junction temperature (TJ).

For a given transistor, the thermal resistance is 8°C/W and for the ambient temperature TA is 27°C. If the transistor dissipates 3W of power, calculate the junction temperature (TJ). Correct Answer 51°C

We know, TJ-TA=HPD TJ=TA+HPD=27+8*3=51°C.

Related Questions

The total thermal resistance of a power transistor and heat sink is 20°C/W. The ambient temperature is 25°C and (TJ)MAX=200°C. If VCE=4V, find the maximum collector current that the transistor can carry without destruction. What will be the allowed value of collector current if ambient temperature rises to 75°C?
For transistor action (a) Base, emitter, and collector regions should have similar size and doping concentrations. (b) The base region must be very thin and lightly doped. (c) The emitter-base junction is forward biased and the base-collector junction is reverse biased. (d) Both the emitter-base junction as well as the base-collector junction are forward biased. Which one of the following pairs of statements is correct?
Which of the following power station is situated in Madhya Pradesh state? Satpura Thermal Power Station Shree Singaji Thermal Power Station Sanjay Gandhi Thermal Power Station Amarkantak Thermal Power Station
A transistor is used in common emitter mode as an amplifier. Then a. The base-emitter junction is forward biased b. The base-emitter junction is reverse biased  c. The input signal is connected in series with the voltage applied to the base-emitter junction  d. The input signal is connected in series with the voltage applied to bias the base-collector junction Which of the following statement is true?
Which of the following conditions must be satisfied for a transistor to be in saturation? 1. Its collector to base junction should be under forward bias 2. Its collector to base junction should be under reverse bias 3. Its emitter to base junction should be under reverse bias 4. Its emitter to base junction should be under forward bias Which of the above conditions are correct?
The total thermal resistance of a power transistor and heat sink is 20°C/W. The ambient temperature is 25°C and (TJ)MAX=200°C. If VCE=4V, find the maximum collector current that the transistor can carry without destruction.
A series is given with one term missing. Select the correct alternative from the given ones that will complete the series. Bakrehswar Thermal Power Station, Bandel Thermal Power Station, Santaldih Thermal Power Station, Kolaghat Thermal Power Station, ?
Which of the following are the characteristics of a Junction Field Effect Transistor? 1. High input resistance 2. Good thermal stability 3. High current gain 4. Noisier than bipolar junction transistor
The following data pertains to the junction of a thermocouple wire used to measure the temperature of the gas stream. Density = 8500 kg/m3, specific heat = 325 J/kg K, thermal conductivity = 40 W/m K and the heat transfer coefficient between the junction and gas = 215 W/m2 K. If thermocouple junction can be approximated as 1 mm diameter sphere, determine how long it will take for the thermocouple to read 99% of the initial temperature difference
Sourab hires a car at junction A and drives 16 km towards north. He takes a right turn and drives 30 km to reach a bus stand. He now drives 10 km after taking a left turn to reach a petrol bunk. Finally, he takes a left turn and drives 30 km, and stops at Junction B. How far is junction A with respect to junction B?