Bissoy.com
Doctors Medicines MCQs Q&A

If the time taken for the moisture removal is obtained from the formula Time = Ss(Xc – Xe)/ Nc * A ln ((X1-Xe)/(X2-Xe)) then the falling curve will be curves symmetrically Where, Ss= Wet solid weight Xc,Xe- constant & equilibrium moisture content X1,X2 – initial and final moisture content

If the time taken for the moisture removal is obtained from the formula Time = Ss(Xc – Xe)/ Nc * A ln ((X1-Xe)/(X2-Xe)) then the falling curve will be curves symmetrically Where, Ss= Wet solid weight Xc,Xe- constant & equilibrium moisture content X1,X2 – initial and final moisture content Correct Answer False

This relation gives the linear relation so the falling rate curve will be linear.

Related Questions

Indifference curves relating to supply of labour have a number of properties some of which are mentioned below
1. Indifference curves are downward slopping
2. Indifference curves are upward slopping
3. Higher indifference curves indicate lower levels of utility
4. Higher indifference curves indicate higher levels of utility
5. Indifference curves do not intersect
6. Indifference curves intersect
7. Indifference curves are concave to the origin
8. Indifference curves are convex to the origin
Which among the following properties are not true?
A dryer is used for drying pears which has initial moisture content of 70 % (wet basis) and final moisture content of 5 % (wet basis). An experimental drying curve for the product indicates that the critical moisture content is 25 % (wet basis) and the time for constant drying is 5 min. Can you estimate the total drying time for product?
It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).
What is the condition for a tree to be weight balanced. where a is factor and n is a node? >= a*weight and weight >= a*weight. b) weight >= a*weight and weight >= a*weight. c) weight >= a*weight and weight >= a*weight. d) weight is a non zero
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
Find the initial moisture content for the batch process if the final moisture content is 25% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period)
Find the final moisture content for the batch process if the initial moisture content is 75% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period)
A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids)
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
There are seven persons - A, B, C, D, E, F and G. They have different weights. The weight of second heaviest person is 185 kg and the weight of second lightest person is 85 kg. Sum of weight of C and D is 290 kg. Only Three persons have more weight than D. E is heavier than both F and G but F is not lightest. The weight of A is 250 kg. Sum of weight of F and G is 135 kg. B is heavier than both C and D but C is not lightest. The weight of D is 140 kg. The weight of E is obtained from removing weight of C from weight of A. Who is the Fourth lightest person?