Find the final moisture content for the batch process if the initial moisture content is 75% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period)

Find the final moisture content for the batch process if the initial moisture content is 75% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period) Correct Answer

Here the final moisture content must be less than critical moisture content.
Bissoy MCQ

Related Questions

Find the initial moisture content for the batch process if the final moisture content is 25% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period)
In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids)
A dryer is used for drying pears which has initial moisture content of 70 % (wet basis) and final moisture content of 5 % (wet basis). An experimental drying curve for the product indicates that the critical moisture content is 25 % (wet basis) and the time for constant drying is 5 min. Can you estimate the total drying time for product?
The admission ticket for an exhibition bears a password which is changed after every clock hour based on set of words chosen for each day. The following is an illustration of the code and steps of rearrangement for subsequent clock hours. The time is 9 a.m. to 3 p.m. Day's first password : First Batch ----- 9 a.m. to 10 a.m. is not ready cloth simple harmony burning Second Batch ----- 10 a.m. to 11 a.m. ready not is cloth burning harmony simple Third Batch ----- 11 a.m. to 12 noon cloth is not ready simple harmony burning Fourth Batch ----- 12 noon to 1 p.m. not is cloth ready burning harmony simple Fifth Batch ----- 1 p.m. to 2 p.m. ready cloth is not simple harmony burning and so on. If the password for 11 a.m. to 12 noon was --- "soap shy miss pen yet the she", what was the password for the first batch ?
It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).
If the time taken for the moisture removal is obtained from the formula Time = Ss(Xc – Xe)/ Nc * A ln ((X1-Xe)/(X2-Xe)) then the falling curve will be curves symmetrically Where, Ss= Wet solid weight Xc,Xe- constant & equilibrium moisture content X1,X2 – initial and final moisture content
Find the region if the final and the initial moisture content are 40% and 30% (Dry basis) and the critical moisture content is 45%.
The eggplant has a dry basis moisture content of 8.9 grams of water per gram of dry solids. What is its wet basis moisture content?