Bissoy.com
Doctors Medicines MCQs Q&A

Find the initial moisture content for the batch process if the final moisture content is 25% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period)

Find the initial moisture content for the batch process if the final moisture content is 25% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period) Correct Answer

Here the initial moisture content must be greater than critical moisture content.

Related Questions

Find the final moisture content for the batch process if the initial moisture content is 75% (dry basis) and the constant moisture content is 40%. (Includes constant and falling rate period)
In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
Which one of the following is the correct sequence of various stages of operating cycle of a manufacturing company?  1. Raw material conversion period, work-in-progress conversion period, Finished goods conversion period, Receivables conversion period 2. Raw material conversion period, work-in-progress conversion period, Creditors payment period, Receivables conversion period 3. Creditor payment period. Raw material conversion period, Receivables conversion period, work-in- progress conversion period 4. Raw material conversion period, Finished goods conversion period, work-in- progress conversion period. Receivables conversion period 
A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids)
A dryer is used for drying pears which has initial moisture content of 70 % (wet basis) and final moisture content of 5 % (wet basis). An experimental drying curve for the product indicates that the critical moisture content is 25 % (wet basis) and the time for constant drying is 5 min. Can you estimate the total drying time for product?
The following table presents the number of candidates trained by a training centre over 6 years (2001 to 2006). Year Batch 1 Batch 2 Batch 3 Batch 4 Batch 5 2001 75 144 114 102 108 2002 90 126 102 84 126 2003 96 114 75 105 135 2004 105 90 150 90 75 2005 90 75 135 75 90 2006 105 60 165 45 120 The number of candidates trained in Batch 2 in 2001 was what percentage more than the number of candidates trained in Batch 5 in 2005?
The admission ticket for an Art Gallery bears a password which is changed after every clock hour based on set of words Chosen for each day. The following is an illustration of the code and steps of rearrangement for subsequent clock hours. The Time is 9 a.m. to 3 p.m. Day’s first password: First Batch – 9 a.m. to 10 a.m. is not ready cloth simple harmony burning Second Batch – 10 a.m. to 11 a.m. ready not is cloth burning harmony simple Third Batch – 11 a.m. to 12 noon cloth is not ready simple harmony burning Fourth Batch – 12 noon to 1 p.m. not is cloth ready burning harmony simple Fifth Batch – 1 p.m. to 2 p.m. ready cloth is not simple harmony burning and so on. If the password for 11 a.m. to 12 noon was –“soap shy miss pen yet the she”, what was the password for the First Batch?
The admission ticket for an exhibition bears a password which is changed after every clock hour based on set of words chosen for each day. The following is an illustration of the code and steps of rearrangement for subsequent clock hours. The time is 9 a.m. to 3 p.m. Day's first password : First Batch ----- 9 a.m. to 10 a.m. is not ready cloth simple harmony burning Second Batch ----- 10 a.m. to 11 a.m. ready not is cloth burning harmony simple Third Batch ----- 11 a.m. to 12 noon cloth is not ready simple harmony burning Fourth Batch ----- 12 noon to 1 p.m. not is cloth ready burning harmony simple Fifth Batch ----- 1 p.m. to 2 p.m. ready cloth is not simple harmony burning and so on. If the password for 11 a.m. to 12 noon was --- "soap shy miss pen yet the she", what was the password for the first batch ?
It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).