What is the unit of measurement for drive access time ?

A nanoseconds
B seconds
C microseconds
D picoseconds

Correct Answer: nanoseconds

অ্যাক্সেস টাইম হ'ল একটি স্টোরেজ ডিভাইসে অ্যাক্সেস শুরু হওয়ার সময় থেকে পরবর্তী অ্যাক্সেস শুরু করার সময়। RAM এ অ্যাক্সেসের সময়টি সাধারণত ন্যানোসেকেন্ডে পরিমাপ করা হয়। হার্ড ডিস্ক বা সিডি - রমে অ্যাক্সেসের সময়টি সাধারণত মিলি সেকেন্ডে পরিমাপ করা হয়।সঠিক উত্তরঃ মিলি সেকেন্ড।
Bissoy MCQ
#তথ্য প্রযুক্তি #মেমোরি-Memory #Agrani bank Ltd #Agrani bank Ltd - Senior Officer (Cancelled) - 31.05.2013

Related Questions

You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?
A as a master
B as a secondary
C as a slave
D as a primary
E as auto-select
One time measurement unit (TMU) in method time measurement system equals
A 0.0001 minute
B 0.0006 minute
C 0.006 minute
D 0.001 minute
Avi drove from his home to college at 60 miles per hour. Returning over the same route, there was a lot of traffic, and he was only able to drive at 40 miles per hour. If the return trip took 1 hour longer. How many miles did Tie drive each way?
A 3
B 5
C 120
D 240
You can drive my car _____ you drive carefully.
A as
B as well
C as well as
D unless
Moni is asking if you want to drive the car yourself. As you want Moni to drive today, you say:
A I would rather you drive
B I would rather you do not drive.
C I would rather you drove.
D would rather you did not drive.
You just installed a new IDE hard drive, but your system BIOS will not recognize the new drive, what should you check first.
A cable sequence
B jumpers on the hard drive
C drivers that need to be loaded
D hard drive manufacturer web site information
E None of the above
A system has two IDE hard drives that are each divided into primary and extended partitions, which drive letter is assigned to the primary partition of the second drive?
A C
B D
C E
D F
E None of the above
Which command is used to copy all files from drive A with extension .TXT to the currently logged drive and directory?
A COPY a: *.TXT
B COPY *.TXT A:
C COPY *.TXT C:
D COPY *.TXT ALL.TXT
E None of the above
While working with which command is used to copy all files from the currently logged drive and directory with the extension .txt to the drive a
A Copy a. *.txt
B Copy *.txt a:
C Copy *.txt c:
D Copy *.txt all.txt
You are installing an IDE hard drive that will be your boot drive. Which is the correct order of steps that need to be followed?
A jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition
B jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch
C jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch
D jumper properly, auto-detect in CMOS, regular format
E jumper properly, partition, low level format, high level format

Next steps