Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following process is used to separate ammonium chloride from a mixture containing ammonium chloride and sodium chloride?

Which of the following process is used to separate ammonium chloride from a mixture containing ammonium chloride and sodium chloride? Correct Answer Sublimation

The correct answer is Sublimation.

  • Sublimation is used to separate ammonium chloride from a mixture containing ammonium chloride and sodium chloride.
  • The transition of a substance directly from the solid to the gaseous state, without passing through the liquid state is called sublimation.
  • Dry ice and heavy CO2  are common examples of sublimation.

Additional Information

  • A process by which solid particles are separated from the liquid is known as precipitation.
  • Centrifugation is a process that is used for the separation of particles from a solution according to their size, shape, density through spinning.
  • Fractional Distillation is a process used to separate liquids with closer boiling points.

Related Questions

Which of the following methods is used to separate Ammonium chloride from a mixture containing Ammonium chloride and Sodium chloride?
10 litre of mixture ‘A’ of Castrol oil and Petrol, containing 64% Petrol, is added to 5 litre of mixture B of Castrol oil and Petrol containing 55% Petrol, to get a mixture C. Then, 30 litre of mixture X containing 12% Castrol oil is added to mixture C. What is the percentage content of Castrol oil in the final mixture?
Measurement of KLa in a bioreactor can be carried out by sodium sulfite oxidation method, that is, based on the oxidation of sodium sulfite to sodium sulfate in the presence of a catalyst (Cu++ or Co++). In a typical experiment, a laboratory fermenter was filled with 5 liter of 0.5 M sodium sulfite solution containing 0.003 M Cu++ ions and the air was sparged in. After 10 min, the air flow was stopped and a 10 mL sample was taken and titrated. The concentration of sodium sulfite in the sample was found to be 0.20 M. The oxygen uptake rate for this aerated system will work out to be
oil and kerosene are present in ratio of 5 : 7 in a liquid. Few litres of mixture of mixture are replaced with petrol. Ratio of oil : kerosene: petrol is 35 : 49 : 18 respectively. Amount of oil removed from mixture is 21 litres less than that of petrol added to the mixture. And amount of oil removed is 6 litres less than that of difference mentioned. Petrol is replacing the mixture removed hence; quantity of mixture is not changing. What is the difference between quantity of kerosene in old mixture and amount of oil in new mixture?
The following question has three statements. Study the question and the statements and decide which of the statement(s) is necessary to answer the question. 6 litres of mixture A and 4 litres of mixture B are mixed to form a new mixture C. Find the amount of water in the new mixture. I) The new mixture had alcohol and water in the ratio 7 ∶ 5. II) Mixture A had alcohol and water in the ratio 5 ∶ 4. III) Mixture B had alcohol and water in the ratio 5 ∶ 3.
Which of the following procedures would you use to separate ammonium chloride from sodium chloride?
Mixture A and Mixture B contain consist of 40 liters and 60 liters of mixtures of liquids X and Y in different proportions. Quantity of liquid X in mixture A is 10 liter less than the quantity of liquid X in mixture B. The total quantity of liquid Y in both the mixtures is 40 liters. If 30% of liquid is taken from mixture A and put into mixture B, then what will be the ratio of liquid X to liquid Y in mixture B?
In a mixture of ghee and dalda, the ratio of ghee to dalda is 5 : a. When 5 litres of ghee were added in the mixture then, the concentration of dalda becomes 50% but when 2 litres of dalda were added in the mixture then the concentration of ghee becomes 40%.  Quantity I : ghee will be what part of the mixture when, 10 litres of ghee were added in the original mixture? Quantity II : Dalda will be what part of the mixture when 3 litres of dalda were added in the original mixture?
A mixture of ammonium chloride and sodium chloride is separated by using:
What is the quantity of mixture A in the final mixture when mixed with mixture B in ratio 3 : 2. l. The mixture A is 25% more than the total quantity mixture of B ll. The total quantity of mixture B in the original mixture is 20 kg