Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following tools is used for making holes in wood, metal and concrete?

Which of the following tools is used for making holes in wood, metal and concrete? Correct Answer Drill machine

Explanation:

Drilling

  • Drilling is an operation to produce a cylindrical hole in a workpiece.
  • The tool used in called “drill bit”.

Additional Information 

Spanner

  • A spanner is a hand tool with jaws or opening or a ring at one end or at both ends for tightening or slackening nuts and bolts and screw heads.
  • It is made of drop- forged, high tensile or alloy steel and heat treated for strength.

[ alt="ringspan" src="//storage.googleapis.com/tb-img/production/19/01/ringspan.PNG" style="width: 300px; height: 279px;">

Hacksaw 

  • A hacksaw is a hand tool used to cut metal.
  • A hacksaw blade is made of either low alloy steel (LA) or high-speed steel (HSS) and is available in standard lengths of 250 mm and 300 mm.
  • The selection of the blade depends on the shape and hardness of the material to be cut.

[ src="https://storage.googleapis.com/tb-img/production/18/06/26.06.2018.020.JPG">

Bench vice

  • Vices are used for holding the work-pieces. They are available in different types.
  • The vice used for bench work is the bench vice or called Engineer’s vice.
  • A bench vice is made of cast iron or cast steel and it is used to hold or clamp work for filing, sawing, threading and other hand operations. 
  • The size of the vice is stated by the width of the jaws. e.g. 150 mm parallel jaw bench vice

[ alt="26.06.20148.00100.003" src="https://storage.googleapis.com/tb-img/production/18/11/26.06.20148.00100.003.PNG">

Related Questions

Historically, the production of wood charcoal in locations where there is an abundance of wood dates back to a very ancient period, and generally consists of piling billets of wood on their ends so as to form a conical pile, openings being left at the bottom to admit air, with a central shaft to serve as a flue. The whole pile is covered with turf or moistened clay. The firing is begun at the bottom of the flue, and gradually spreads outwards and upwards. The success of the operation depends upon the rate of the combustion. Under average conditions, 100 parts of wood yield about 60 parts by volume, or 25 parts by weight, of charcoal; small-scale production on the spot often yields only about 50%, while large-scale became efficient to about 90% even by the seventeenth century. The modern process of carbonizing wood, either in small pieces or as sawdust in cast iron retorts, is extensively practiced where wood is scarce, and also for the recovery of valuable byproducts (wood spirit, pyroligneous acid, wood tar), which the process permits. The information given, if accurate, most strongly supports which of the following?
In this question a passage and a statement related to it have been given. Read carefully the passage and review the statement based on it. When Shah Jahan gave his love for Mumtaz, he would have believed that the river would continue to flow. There was no solid land on which the foundation could be laid. Therefore, to reduce the level of water, he used an engineering system to use the foundation of deep well and it was filled with stone and mud. Finally, he covered them with wooden box work structure and the tomb Made Yamuna is an integral part of the creation of the Taj and there was no such predict ion that it would dry up or become narrow. But the river was narrow and it became contaminated. The timber of wood is likely to be brittle or disintegrated as the venetian made on the foundation of wood, indicates that when the wood is submerged in the wood, the age of the wood increases. When the wood does not come in contact with oxygen, then that But such creatures cannot be found who destroy them. Due to the dryness and contamination of the Yamuna, the breakdown of a wooden tree can break. Statement. To maintain the structure of the TajMahal, a revival of Yamuna river is necessary. Choose one of the following options. A. The statement is definitely true. B. The statement is probably true. C. Statement cannot be determined D. Statement is definitely wrong.
In this question a passage and a statement related to it have been given. Read carefully the passage and review the statement based on it. When ShahJahan gave his love for Mumtaz, he would have believed that the river would continue to flow. There was no solid land on which the foundation could be laid. Therefore, to reduce the level of water, he used an engineering system to use the foundation of deep well and it was filled with stone and mud. Finally, he covered them with wooden box work structure and the tomb Made Yamuna is an integral part of the creation of the Taj and there was no such predict ion that it would dry up or become narrow. But the river was narrow and it became contaminated. The timber of wood is likely to be brittle or disintegrated as the venetian made on the foundation of wood, indicates that when the wood is submerged in the wood, the age of the wood increases. When the wood does not come in contact with oxygen, then that But such creatures cannot be found who destroy them. Due to the dryness and contamination of the Yamuna, the breakdown of a wooden tree can break. Statement: Tajmahal is built on a strong solid land along Yamuna river. Choose one of the following options. A. The statement is definitely true. B. The statement is probably true. C. Statement cannot be determined D. Statement is definitely wrong.
Permeability in concrete is studied towards providing for, or guarding against, which of the following features? 1. The penetration by materials in solution may adversely affect the durability of concrete; moreover, aggressive liquids 'attack' the concrete. 2. In the case of reinforced concrete, ingress of moisture and air will result in corrosion of steel leading to an increase in the volume of steel, resulting in cracking and swilling of the concrete cover. 3. The moisture penetration depends on permeability and if the concrete can become saturated with water it is less vulnerable to frost action.
Consider the following statements: 1. HSS tools wear very rapidly, whereas in cemented carbide tools, even though hardness is retained, crater wear can occur due to solid-state diffusion. 2. Cutting tools made of Super-HSS, also known as cobalt-based HSS, are made by adding 2% to 15% of cobalt which increases the cutting efficiency at heavier cuts by increasing the hot hardness and wear resistance. 3. Tools failure due to excessive stress can be minimized by providing small or negative rake angles on brittle tool materials, protecting tool tip by providing large side-cutting edge angles, and honing a narrow chamfer along the cutting edge. Which of the above statements are correct?
In this question, three statements and then three conclusions are given. Assuming the statement is the whole truth, then decide together with the findings that decide which conclusions are undoubtedly logical based on the information given in the statement.   Statement: Some lines are columns. There are some column layouts. There are all layers of wood. Conclusion: i) Some columns are wood. ii) There are some lines of wood. iii) There is no line of wood.
Read the given statements and conclusions carefully. Assuming that the information given in the statements is true, even if it appears to be at variance with commonly known facts, decide which of the given conclusions logically follow(s) from the statements. Statements: I. Some wood are chairs. II. All chairs are mats. Conclusions: I. Some mats are wood. II. Some chairs are wood. III. All wood are mats.
The influence of shape of aggregate in strength and workability of concrete are given below in statements S1, S2, S3 and S4. Which of the statements are correct? S1: Rounded aggregate produces concrete with high workability and low strength. S2: Angular aggregate produces concrete with high workability and low strength. S3: Rounded aggregate produces concrete with low workability and high strength. S4: Angular aggregate produces concrete with low workability and high strength.
What is the general categorisation of equipments for manufacturing garments?
1. Measuring tools
2. Marking tools
3. Cutting tools
4. Pressing tools
The following statements (S1, S2, S3) pertain to mass concreting. Which of the following statements are correct? S1: The materials preferred for mass concrete are: Portland cement with low heat of hydration, Pozzolanas, Aggregates (coarse and fine), Water, Admixture, Coolants. S2: Slump of mass concrete shall be the same or more than ordinary concrete work. S3: Concrete with a low water cement ratio, correctly consolidated and properly cured provides durability to mass concrete work.