What do I do if I overhauled my carburetor and now my VW Beetle won't start?

Make sure your accelerator pump is working, if there's an adjustment adjust it so you get a good strong stream coming out. Make sure you have power to your air bypass valve, and look for leaks at the intake gasket. You might even have your float set too low, make sure it is at the top of the bowl, usually one thin copper washer under float valve. Yes, you will probably have to take it off and apart, it's easier on a bench. Check volume screw (small one) is out about 2 1/2 turns and the big screw bypass screw about 1 1/2 turns. Put it back on. It could be a lot of things, as I didn't even mention the choke or vacuum leak. But make sure she squirts first and foremost. If you still can't find the problem, take it to a mechanic.