In a full wave junction diode rectifier, the input a.c. has an rms value of `10V`. The transformer used is a step up transformer having transformation

Question

In a full wave junction diode rectifier, the input a.c. has an rms value of `10V`. The transformer used is a step up transformer having transformation

In a full wave junction diode rectifier, the input a.c. has an rms value of `10V`. The transformer used is a step up transformer having transformation ratio `1:2`. Calculate the d.c. and a.c. voltages in the rectified output.

Monjur Alahi

5 views

2025-01-04 04:42

1 Answers

Related Questions

The emf `varepsilon` of a Cu-Fe thermocouple varies with the temperature `theta` of the hot junction (cold junction at `0^(@)C` ), as `varepsilon(mu V

2 Answers 7 Views

With the cold junction at `0^(@)C` the neutral temperature for a thermo-couple is obtained at `270^(@)C`. The cold junction temperature is now lowered

2 Answers 4 Views

Give the direction of thermoelectric current (i) at the cold junction of copper-bismuth, (ii) at the hot junction of iron-copper and (iii) at the cold

2 Answers 5 Views

In a series `LCR` circuit with an AC source, `R = 300 Omega, C = 20 muF, L = 1.0 henry, epsilon_(rms) = 50 V` and `v = 50/(pi) Hz`. Find (a) the rms c

2 Answers 7 Views

A power transformer (step up) with an `1:8` turns ratio has `60 Hz,120 V` across the primary, the load in the secondary is `10^(4) Omega`.The current

2 Answers 5 Views

A solenoid having a resistance of `5Omega` and self-inductance of 4H is connected to a battery of emf 10V and negligible resistance. After how long wi

2 Answers 11 Views

When the voltage drop across a `p-n` junction diode in increased from `0.70V` to `0.71V` the change in the diode current is `10mA`. What is the dynami

2 Answers 6 Views

A crystal diode having internal resistance `200Omega` is used as a half rectifier. If the applied voltage is `V=50 sin omegat` volt and load resistanc

2 Answers 4 Views

What causes a larger current through a p-n junction diode when forward biased?

2 Answers 4 Views

Explain the importance of the depletion region in a p-n junction diode.

2 Answers 5 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

Salim Ahmed Kawsar

Correct Answer - `18.01V, 8.62V`

5 views Answered 2023-02-05 15:29