Obtain the resonant frequency and Q – factor of a series LCR circuit with L = 3H, C = `27muF, " " R = 7.4Omega`. It is desired to improve the sharpnes

Question

Obtain the resonant frequency and Q – factor of a series LCR circuit with L = 3H, C = `27muF, " " R = 7.4Omega`. It is desired to improve the sharpnes

Obtain the resonant frequency and Q – factor of a series LCR circuit with L = 3H, C = `27muF, " " R = 7.4Omega`. It is desired to improve the sharpness of resonance of circuit by reducing its full width at half maximum by a factor of 2. Suggest a suitable way.

Monjur Alahi

4 views

2025-01-04 04:42

1 Answers

Related Questions

In a series `LCR` circuit with an AC source, `R = 300 Omega, C = 20 muF, L = 1.0 henry, epsilon_(rms) = 50 V` and `v = 50/(pi) Hz`. Find (a) the rms c

2 Answers 7 Views

In an LCR circuit, the capacitance is made one-fourth, when in resonance. Then what should be the change in inductance, so that the circuit remains in

2 Answers 4 Views

An `LCR` circuit has `L=10 mH,R=150 Omega` and `C=1 muF` connacted in series to a source of `150sqrt2 cos omegat` volt. At a frequency that is `50%` o

2 Answers 5 Views

Derive an experssion for the average power in LCR circuit connected to a.c. supply. Hence define power factor. Show that average power cousumed per cy

2 Answers 6 Views

An alternating voltage of frequency `f` is applied across a series `LCR` circuit.Le `f_(r)` be the resonance frequency for the circuit.Will the curren

2 Answers 6 Views

A series `LCR` circuit with `L=0.125//pi H,C=500//pi nF,R=23Omega` is connected to a `230 V` variable frequency supply. (a)What is the source frequenc

2 Answers 6 Views

In a series LCR circuit, the frequencies at which the current amplitude is`(1)/(sqrt(2))`mes the current amplitude at resonance are` f_(1) and f_(2) (

2 Answers 4 Views

The total resistance of a simple circuit is `80 Omega` including the resistance of a tangent galvanometer which is `4Omega.` The galvanometer shows a

2 Answers 7 Views

In series LCR circuit `R=120 Omega` and it has resonant frequency `4000 rad//sec`. At resonance, the voltage across resistance and inductance is 60 V

2 Answers 6 Views

One ampere of current enters the junction A of a wheatstone bridge ABCD with `AB=2Omega,BC=2Omega,AC=4Omega,CD=2Omega and R_(g)=4Omega`. Find the curr

2 Answers 6 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

` because " resonant frequency for LCR circuit is given by " v_(0) = (1)/(2pisqrt(lc))`
` = (1)/(2 xx 3.14 sqrt(3 xx 27 xx 10^(-6)))`
= 17.69 Hz
`" or "omega_(0) = 2piv_(0) = 111"rad"//s.`
`because " quality factor of resonance "`
`Q = (omega0)/(2Deltaw) = (omega_(o)L)/(R) = (1)/(R) sqrt((L)/(C))`
`therefore Q = (1)/(7.4)sqrt((3)/(27 xx 10^(-6))) = 45.0`
To improve sharpness of resonance circuit by a factor 2, without reducing `omega_(0)`, reduce R to half of its value i.e. R = `3.7 Omega`