During the electrolysis of 0.1 M `CuSO_(4)` solution using coppepr electrodes, a depletion of `[Cu^(2+)]` occurs near the cathode with a corresponding

Question

During the electrolysis of 0.1 M `CuSO_(4)` solution using coppepr electrodes, a depletion of `[Cu^(2+)]` occurs near the cathode with a corresponding

During the electrolysis of 0.1 M `CuSO_(4)` solution using coppepr electrodes, a depletion of `[Cu^(2+)]` occurs near the cathode with a corresponding excess near the anode, owing to inefficient stirring of the solution. If the local concentration of `[Cu^(2+)]` near the anode and cathode are respectively 0.12 M and 0.08 M, calcualte the back emf developed. Temperature = 298 K.
A. 22 mV
B. 5.2 mV
C. 29 mV
D. 59 mV

Monjur Alahi

5 views

2025-01-04 04:42

1 Answers

Related Questions

`100` gm of anhydrous `CuSO_(4)`, when dissolved in excess of water produces `42` kJ of heat. The same amount of `CuSO_(4).5H_(2)O` on dissolving in l

2 Answers 4 Views

Assertion : The thickness of depletion layer is fixed in all semiconductor devices. Reason: Free charge carriers are available in depletion layer.

2 Answers 5 Views

The emf of the cell `Cu|underset(a=0.1)(CuSO_(4))||underset(x)(CuSO_(4))|Cu` is `-0.03` V at `25^(@)C`. Calculate the activity of copper sulphate solu

2 Answers 5 Views

19 g of molten `SuCl_(2)` is electrolysed for some time using inert electrodes until 0.119 g of Sn is deposited at the cathode. No substance is lost d

2 Answers 4 Views

Cadmium amalgam is prepared by electrolysis of a solution of `CdCl_(2)` using a mercury cathode. Find how long a current of 5 ampere should be passed

2 Answers 4 Views

The emf of the cells obtained by combining zinc and copper electrodes of the Daniell cell with calomel electrodes are 1.083 volt and -0.018 volt respe

2 Answers 7 Views

`1L` of `1M CuSO_(4)` solution is electrolyzed using `Pt` cathode and `Cu` anode. After passing `2F` of electricity, the `[Cu^(2+)]` will be

2 Answers 4 Views

Statement-1: Copper is dissolved at anode and deposited at cathode when Cu electrodes are used and electrolyte is 1M `CuSO_(4)(aq)` solution. Statemen

2 Answers 5 Views

Zn amalgam is prepared by electrolysis of aqueous `ZnCl_(2)` using Hg cathode (9gm) How much current is to be passed through `ZnCl_(2)` solution for 1

2 Answers 9 Views

By the electrolysis of aqueous solution of `CuSO_(4)`, the products obtained at both the inert electrodess are:

2 Answers 4 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

Salim Ahmed Kawsar

Correct Answer - B
`E_(cell)=E_(cell)^(0)-(0.0591)/(2)log_(10)(([Cu^(2+)]_("cathode"))/([Cu^(2+)]_("anode")))`
`E_(cell)^(0)=0`
`E_(cell)=-(0.591)/(2)log_(10)((0.08)/(0.12))=+5.2V`.

5 views Answered 2023-02-05 15:29