Your OTA is probably way too big for a wedge. I have never seen an 11" OTA on a wedge.
2 Answers 1 viewsApply new caulking before you paint and finish the walls. This helps you achieve a smooth, professional look.
2 Answers 1 viewsIf it's finished over with a clear coat and lacquered, you definitely want to remove that by sanding it down or using a chemical stripper. If it doesn't have a...
2 Answers 1 viewsYes, this is a good idea. Particle board is a pretty rough material, so take some time to sand any rough edges before you get started.
2 Answers 1 viewsIt’s not necessary, but some model enthusiasts prefer to prime their projects before painting them. Use a thin coat so you don’t obscure any details. The primer will slightly roughen...
2 Answers 1 viewsClean the surface that you plan to paint. Spread a drop cloth to catch the spills. Cover nearby items with plastic. Put painter's tape on the areas where you do...
2 Answers 1 viewsDo you have 2 windows in the room? If so, try it on one window and see if you like it. Keep the old blinds in case it does not...
2 Answers 1 viewsYou want to scuff it up to a point where the primer is going to be able to grab and adhere to it. Sand the area until it becomes a...
2 Answers 1 viewsI recommend sanding down the wood for a smooth finish. After, apply primer, sanding in between coats of primer in order to get a better adhesion to the paint.
2 Answers 1 views