Why is there a screw in the drain plug?

There may be hair or debris stuck in the drain. Try cleaning it out by running a wet/dry vacuum hose against the drain.

For a 16 mm hole, I do not believe there is a Rawl plug. Use a Dyna bolt or AnkaScrew.

Interior ceiling lights usually have no ground wire connection, unless there is a receptacle in addition to the socket. Remember that the "hot" (black or red) wire goes to the...

If you notice a decrease in drainage in your Jackson Pratt drain, I recommend checking both the incision site and the drain itself.

It could be a sign that the drain wasn't installed properly. When a French drain is installed correctly with the right filter fabric and crushed stone, it should really never...

Do not adjust idle screw, that is set in the factory and shouldn't need to be adjusted. Fix the problem that is causing rough idle or whatever idle problems you...

I tried to, but it never works. Because I liked Sovngarde so much I saved the game after killing Alduin and explored around.

An old-school trick is to use wood glue and toothpicks to fill the hole. Now, you can get a strong wood epoxy or use threaded inserts. You can also buy...

Use an E screw and twist it to the left. This helps the screw get loose. After that, you should go back to the S screw.

Slowly start adjusting the screw out while, at the same time, opening your door so that the door shuts all the way without you pulling it in. If the door...