Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripherial velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m³ here, V =πN.D where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m)?

3.6 V.W.Dr.ρ
3.6 V.W. ρ
3.6 W.Dr.ρ
3.6 V.W.Dr/ρ

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

Let'

5 views Answered 2022-09-01 13:21

Related Questions

What is the usual value of angle of nip for crushing of ordinary rock in smooth steel crushing rolls?

1 Answers 6 Views

Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in?

1 Answers 5 Views

The usual proportion for the width of key is (where d = Diameter of shaft or diameter of hole in the hub)?

1 Answers 4 Views

Discharge (Q) of a centrifugal pump is given by (where D = Diameter of impeller at inlet, b = Width of impeller at inlet, and Vf = Velocity of flow at inlet)?

1 Answers 4 Views

According to Kennedy, the critical velocity (V₀) in meters in a channel is the mean velocity which keeps the channel free from silting or scouring. Its value is given by (where m is critical velocity ratio and D is the depth of the channel).?

1 Answers 5 Views

Capacity (in tons/hr) of jaw/gyratory crusher is equal to (where, L = length of the receiving opening, cm S = greater width of the discharge opening, cm)?

1 Answers 4 Views

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area, m² V = rising velocity of fluid, m/sec.S = percentage of solids in the suspension by volume.ρ = density of solids, kg/m³)?

1 Answers 5 Views

Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles)?

1 Answers 7 Views

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m³)?

1 Answers 5 Views

Rittinger number which designates the new surface prduced per unit of mechanical energy absorbed by the material being crushed, depends on the?

1 Answers 4 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)