Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m³)?

3.6 W.D.V.ρ
3.6 W.D.V.
3.6 W.V.ρ
3.6 D.V.ρ

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

Let'

5 views Answered 2022-09-01 13:21

Related Questions

Two men and women are entrusted with a task. The second man needs three hours more to cope up with the job than the second man and the woman would need working together. The first man, working alone, would need as much time as second man and the woman working together. The first man working alone, would spend eight hours less than the double period of the time second man would spend working alone. How much time would the two men and the women need to complete the task if they all asked together?

1 Answers 12 Views

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface)?

1 Answers 4 Views

The celerity (velocity) of a pressure wave in a fluid is given by (where K = Bulk modulus, and ρ = Density of the fluid)?

1 Answers 5 Views

The location of centre of pressure, which defines the point of application of the total pressure force on the surface, can be calculated by applying the principle of moments according to which "sum of the moment of the resultant force about an axis is equal to the sum of the components about the same axis". The centre of pressure of a rectangular surface (of width 'w') immersed vertically in a static mass of fluid is at a depth of(where, y = depth of the liquid)?

1 Answers 6 Views

Resistance to heat flow by conduction is proportional to (where, t & ρ are thickness & density of the material respectively and A = area normal to the direction of heat flow. )?

1 Answers 5 Views

Capacity (in tons/hr) of jaw/gyratory crusher is equal to (where, L = length of the receiving opening, cm S = greater width of the discharge opening, cm)?

1 Answers 4 Views

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area, m² V = rising velocity of fluid, m/sec.S = percentage of solids in the suspension by volume.ρ = density of solids, kg/m³)?

1 Answers 5 Views

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripherial velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m³ here, V =πN.D where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m)?

1 Answers 5 Views

Assertion A : Intervention of undulations in the sea bed reduces the depth of wave at the section.Reason R : No wave can have a height greater than the depth of water through which it passes.Select your answer based on the coding system given below:?

1 Answers 5 Views

Which is the most suitable conveyor for transportation of sticky material?

1 Answers 4 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)