- only shear stresses
- only tensile stresses
- both (a) and (b)
- none of the above
1 Answers
Call
Talk Doctor Online in Bissoy App
When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)?
Answer: Option 4 Let'
1 Answers 2 views
In order to avoid tearing of the plate at an edge, the distance from the centre line of the rivet hole to the nearest edge of the plate should be equal to (where d = Diameter of rivet hole)?
Answer: Option 2 Let'
1 Answers 1 views
According to I.B.R., shearing resistance required to shear off the rivet per pitch length (in double shear) is (where n = Number of rivets per pitch length)?
Answer: Option 2 Let'
1 Answers 2 views
Tearing resistance required to tear off the plate per pitch length is (where p = Pitch of rivets, d = Dia. of rivet hole and $${\sigma _{\text{t}}}$$ = Permissible tensile stress for plate material)?
Answer: Option 4 Let'
1 Answers 1 views
In order to avoid tearing off the plate at an edge, the distance from the center of the rivet hole to the nearest edge of the plate (i.e. margin) should be (where d = Diameter of rivet hole in mm)?
Answer: Option 2 Let'
1 Answers 1 views
According to parallel axis theorem, the moment of inertia of a section about an axis parallel to the axis through center of gravity (i.e. $$I$$P) is given by (where, A = Area of the section, $$I$$G = Moment of inertia of the section about an axis passing through its C.G. and h = Distance between C.G. and the parallel axis.)?
Answer: Option 1 Let'
1 Answers 1 views
Minimum pitch of the rivets shall not be less than (where d is gross diameter of rivet)?
Answer: Option 3 Let'
1 Answers 1 views
A riveted joint in which every rivet of a row is opposite to other rivet of the outer row, is known as?
Answer: Option 1 Let'
1 Answers 1 views