Estimating And Costing MCQ

Test your knowledge with important Estimating And Costing MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Estimating And Costing MCQs on Bissoy. Bissoy App

• The floor area includes the area of the balcony up to
  ক

  100 %

  খ

  75 %

  গ

  50 %

  ঘ

  25 %
• Pick up the excavation where measurements are made in square meters for payment.
  ক

  Ordinary cuttings up to 1 m

  খ

  Surface dressing up to 15 cm depths

  গ

  Surface excavation up to 30 cm depths

  ঘ

  Both (B) and (C)
• The trap which is provided to disconnect the house drain from the street sewer is called
  ক

  Master trap

  খ

  Intercepting trap

  গ

  Interception manhole

  ঘ

  All the above
• The following item of earth work is not measured separately.
  ক

  Setting out of works

  খ

  Site clearance

  গ

  Steps in deep excavation

  ঘ

  All the above
• The item of the brick structure measured in sq.m, is
  ক

  Reinforced brick work

  খ

  Broken glass coping

  গ

  Brick edging

  ঘ

  Brick work in arches
• The item of steel work which is measured in sq.m, is
  ক

  Collapsible gates

  খ

  Rolling shutters

  গ

  Ventilators and glazing

  ঘ

  All the above
• Brick walls are measured in sq. m if the thickness of the wall is
  ক

  10 cm

  খ

  15 cm

  গ

  20 cm

  ঘ

  None of these
• Pick up the item whose weight is added to the weight of respective item, is
  ক

  Cleats

  খ

  Brackets

  গ

  Bolts

  ঘ

  All the above
• Cost of fittings and their fixing is specified for the following sanitary fittings
  ক

  Water closets

  খ

  Flushing pipes

  গ

  Lavatory basins

  ঘ

  All the above
• The weight of an item is measured correct to nearest
  ক

  0.25 kg

  খ

  0.50 kg

  গ

  0.75 kg

  ঘ

  1.00 kg
• The expected out turn for earth work in excavation in ordinary soil per workman per day is
  ক

  1.00 cum

  খ

  2.00 cum

  গ

  3.00 cum

  ঘ

  4.00 cum
• The slope of the outlet of 'P trap' below the horizontal is kept
  ক

  8°

  খ

  10°

  গ

  12°

  ঘ

  14°
• The unit of measurement is per quintal for the following:
  ক

  Collapsible gates with rails

  খ

  Rolling shutters

  গ

  Expanded metal wire netting

  ঘ

  M.S. reinforcement of R.C.C. works
• The height of the sink of wash basin above floor level is kept
  ক

  60 cm

  খ

  70 cm

  গ

  75 cm to 80 cm

  ঘ

  80 cm
• Pick up the item of work not included in the plinth area estimate
  ক

  Wall thickness

  খ

  Room area

  গ

  W' Area

  ঘ

  Courtyard area
• While estimating a reinforced cement structure, the omitted cover of concrete is assumed
  ক

  At the end of reinforcing bar, not less than 25 mm or twice the diameter of the bar

  খ

  In thin slabs, 12 mm minimum or diameter of the bar whichever is more

  গ

  For reinforcing longitudinal bar in a beam 25 mm minimum or diameter of the largest bar which is more

  ঘ

  All the above
• Berms are provided in canals if these are
  ক

  Fully in excavation

  খ

  Partly in excavation and partly in embankment

  গ

  Fully in embankment

  ঘ

  All the above
• The brick work is not measured in cu m in case of
  ক

  One or more than one brick wall

  খ

  Brick work in arches

  গ

  Reinforced brick work

  ঘ

  Half brick wall
• According to Indian Standards Institute, the actual size of modular bricks is
  ক

  23 cm × 11.5 cm × 7.5 cm

  খ

  25 cm × 13 cm × 7.5 cm

  গ

  19 cm × 9 cm × 9 cm

  ঘ

  20 cm × 10 cm × 10 cm
• The brick work is measured in sq metre, in case of
  ক

  Honey comb brick work

  খ

  Brick flat soling

  গ

  Half brick walls or the partition

  ঘ

  All the above
• The measurement is not made in square meters in case of
  ক

  D.P.C. (Damp proof course)

  খ

  Form works

  গ

  Concrete Jeffries

  ঘ

  R.C. Chhajja
• The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is
  ক

  1.00 m³

  খ

  1.25 m³

  গ

  1.50 m³

  ঘ

  1.75 m³
• The order of booking dimensions is
  ক

  Length, breadth, height

  খ

  Breadth, length, height

  গ

  Height, breadth, length

  ঘ

  None of these
• The main factor to be considered while preparing a detailed estimate, is
  ক

  Quantity of the materials

  খ

  Availability of materials

  গ

  Transportation of materials

  ঘ

  All the above
• The most reliable estimate is
  ক

  Detailed estimate

  খ

  Preliminary estimate

  গ

  Plinth area estimate

  ঘ

  Cube rate estimate
• The cross-sections for a highway is taken at
  ক

  Right angle to the centre line

  খ

  30 meters apart

  গ

  Intermediate points having abrupt change in gradient

  ঘ

  All the above
• The rate of an item of work depends on
  ক

  Specifications of works

  খ

  Specifications of materials

  গ

  Proportion of mortar

  ঘ

  All the above
• According to ISI method of measurement, the order of the sequence is
  ক

  Length, breadth, height

  খ

  Breadth, length, height

  গ

  Height, length, breadth

  ঘ

  None of these
• In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and
  ক

  Breadth of the wall

  খ

  Half breadth of wall on each side

  গ

  One fourth breadth of wall on each side

  ঘ

  None of these
• The 'centre line method' is specially adopted for estimating
  ক

  Circular buildings

  খ

  Hexagonal buildings

  গ

  Octagonal buildings

  ঘ

  All the above