Airport Engineering MCQ
Test your knowledge with important Airport Engineering MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Airport Engineering MCQs on Bissoy. Bissoy App
-
The maximum value of the angle of turning of the nose gear large jet aircrafts, is limited to
-
For determining the basic runway length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is
-
The minimum width of clearway is
-
The capacity of parallel runway pattern depends upon
-
The lift off distance is the distance along the centre of the runway between the starting point and
-
Speed of
-
The length of clear zone for none instrument runway of a small aircraft is
-
Calm period is the percentage of time during which wind intensity is less than
-
As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed
-
The fuse large includes
-
The maximum length and pavement strength of the runway is that of
-
According to I.C.A.O. the recommended length of air ports is decided on
-
Runway threshold is indicated by a series of parallel lines starting from a distance of
-
In Instrumental landing system, the middle markers are located
-
The landing and takeoff of the air craft is made against the direction of wind. In no case the centre line of the runway should make an angle with the wind direction exceeding
-
International Civil Aviation Organization (I.C.A.O.) was set up at Montreal (Canada), in
-
Pick up the correct abbreviation from the following:
-
Wing loading of an aircraft is
-
Maximum gross takeoff weight of an aircraft is
-
The meteorological condition which influences the size and location of an air port is
-
In instrument landing system
-
For Class ‘A’ Air port the difference of reduced levels of higher and lower edges of the conical surface, is
-
According to ICAO, all markings on the runways are
-
Airport elevation is the reduced level above M.S.L. of
-
For supersonic transport aircraft, the minimum turning radius of taxiway is
-
Castor angle is defined as the angle
-
For night landing, the thresholds are lighted
-
The threshold markings are
-
The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are
-
Two single runways may be arranged so as to have