Related Questions

A rectangular field of 200m by 120m has two roads running along its center, one along the length and the other along the width. If the width of the roads is 5m, what is the area covered by the two roads?
A 1575 sq.m.
B 1600 sq.m.
C 1550 sq.m.
D 400 sq.m.
The centre to centre spacing of heliport lighting along the periphery of landing and takeoff area should be
A 2.5 m
B 5.0 m
C 7.5 m
D 10.0 m
The lift off distance is the distance along the centre of the runway between the starting point and
A End of the runway
B End of stop-way
C Point where air craft becomes air borne
D Point where air craft attains a height of 10.7 m
From the end of an instrumental runway, the approach surface rises outwards
A 1 in 20
B 1 in 30
C 1 in 40
D 1 in 50
As per ICAO recommendation, minimum width of safety area for instrumental runway should be
A 78 m
B 150 m
C 300 m
D 450 m
In working stress design, permissible bond stress in the case of deformed bars is more than that in plain bars by
A 10%
B 20%
C 30%
D 40%
The landing and takeoff of the air craft is made against the direction of wind. In no case the centre line of the runway should make an angle with the wind direction exceeding
A 10°
B 20°
C 30°
D 40°
According to I.C.A.O. the slope of transitional surface at right angles to the centre line of runway, is kept
A 1 in 4
B 1 in 5
C 1 in 6
D 1 in 7
The best direction of a runway is along the direction of
A Longest line on wind rose diagram
B Shortest line on the wind rose diagram
C Line clear of wind rose diagram
D None of these
Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than
A 42 diameters from the centre of the column
B 42 diameters from the inner edge of the column
C 42 diameters from the outer edge of the column
D 24 diameters from the centre of the column

Next steps