Bissoy.com
Doctors Medicines MCQs Q&A

In a central AC plant, the expansion device used is

In a central AC plant, the expansion device used is Correct Answer Thermostatic expansion valve

For reducing the pressure and amount of liquid refrigerant into the evaporator a refrigerant control device is located at the inlet of the evaporator coil. The expansion valve used in central air conditioning plants are thermostatic expansion valve or electronic expansion valve.

Related Questions

When device A has a cable that plugs into device B, and device B has a cable that plugs into device C and device C plugs into a port on the computer, this arrangement is called a _________
What is the relation between linear expansion coefficient (α), Areal expansion coefficient (β) and volume expansion coefficient (ϒ)
The expansion ratio (r) is the ratio of (where v1 = Volume at the beginning of expansion and v2 = Volume at the end of expansion)
Air at a density of 1.2 kg/m3 flows in a straight duct such that the velocity at the centre is 12.5 m/s. the method factor for the velocity profile is known to be 0.80. The air flow encounters a symmetric expansion such that the cross- sectional are of the duct becomes double. The static pressure value at the inlet and outlet of the expansion are 60 Pa and 90 Pa respectively. Neglecting friction the shock pressure loss on account of expansion in Pa is
Read the following statements: I. Diesel power plant is generally used as base load plant. II. Gas turbine power plant is used as peak load plant.
The expansion device used with flooded evaporators is known as expansion valves.
Prashant bought a device from an online store for Rs. 22000, but it was faulty so he returned it, the company accepts a return after deducting 10%. He saw the same device at a discounted price of Rs. 19000, he again ordered the same device, again it was found faulty, he makes a return, the company takes the return after deducting 12%. The amount of money he lost in this whole transaction is what percent of the cost of the device he bought initially?
Which of the following are true? A. Desktop computer is a general-purpose computer made up of a separate monitor, keyboard, mouse and processor unit B. Laptop is where monitor, keyboard, pointing device, processor unit are combined in a single device C. Tablet is a device with a touch screen; which has a virtual keyboard which uses touch screen technology D. Smart Watch is a device that uses CRT technology so that the screen can bend around the wrist E. Mainframe computer runs small application where small data need to be processed Choose the correct answer from the options given below:
We describe a protocol of input device communication below: i) Each device has a distinct address. ii) The BUS controller scans each device in a sequence of increasing address value to determine if the entity wishes to communicate iii) The device ready to communicate leaves its data in the I/O register iv) The data is picked up and the controller moves to the step a Identify the form of communication best describes the I/O mode amongst the following.
The following question consists of six sentences of a passage. The first and the sixth sentences are given in the beginning as S1 and S6. The middle four sentences in each have been jumbled up and labelled P, Q, R and S. You are required to find the proper sequence of the four sentences and mark your response accordingly. S1: A single device can heat fluids without requiring an electrical element. S6: Because there is no electrical element, there is no risk of fire, so the system is suitable for dangerous environments. P: A heat exchanger transfers heat from the central cavity to an air heater, a water heater or an industrial processor. Q: It has a container like the crankcase of a car’s engine, which contains the fluid to be heated. R: Compression and friction at the nozzles heat the fluid so that the temperature in the central -cavity rises steadily. S: A motor and pulley inside the container turn a rotor wheel, which in turn forces the fluid again and again through narrow nozzles into a central cavity. The proper sequence should be