Bissoy.com
Doctors Medicines MCQs Q&A

The Schottky-barrier diode has

The Schottky-barrier diode has Correct Answer no PN junction

  • A Schottky diode is formed between metal and semiconductor (n-type), thus there is no p-n junction in Schottky diode
  • Schottky diodes have less recovery time compare to normal diodes and hence provide fast switching speeds
  • Schottky diodes are used at high-frequency applications

Related Questions

Consider the following diodes: 1. Gunn diode 2. Schottky diode 3. Crystal diode 4. Tunnel diode Which of these can be used as detector diodes?
For a diode the transition capacitance was 15pF. The diode is replaced with another diode of same material with twice cross sectional area. Terminal voltage remains unchanged. The capacitance of new diode is __________
Find the current Ix if the voltage across the diode is 0.5V. The reverse saturation current of diode 10-11A, the cut-in voltage of diode is 0.6V. Assume that the temperature at which diode operates is 25°C. The resistance R1=2KΩ.
From the given circuit diagram, considering the diode to be a silicon semiconductor diode, what is the magnitude of diode current? (Use an appropriate model of the diode)
Two diodes are in series. The first diode has a voltage of 0.75 V and the second has a voltage of 0.8 V. If the current through the first diode is 500 mA, what is the current through the second diode
The input voltage V1 of the circuit the circuit is 2V and resistor has a resistance of 1KΩ. The cut-in voltage of the silicon diode is 0.7V and the reverse saturation current is 10-8A. The temperature at which diode operates is 30°C. The voltage across resistor when diode starts conducting is _________________
Select the option that is true regarding the following two statements labeled Assertion (A) and Reason (R). Assertion (A): Whenever we measure an electrical signal, there are chances of over current which leads to overheating of the meter. In such cases, the meter can be protected by using a semiconductor diode of suitable rating. Reason (R): As soon as the diode is short-circuited, the meter current is diverted through the diode. As a result, the meter is being protected from excess heating.
Assertion (A): A p-n junction diode with low junction depth can be used as a solar cell when illuminated by suitable light (wavelength) at the top thin layer above the junction. Reason (R): A p-n junction diode under no condition can be used as a solar cell. It can be used only as a light-emitting diode for optoelectronic applications.
1. The pin diode consists of two narrow, but highly doped, semiconductor regions separated by a thicker, lightly doped material called the intrinsic region. 2. Silicon is used most often for its power-handling capability and because it provides a highly resistive intrinsic region. 3. The pin diode acts as an ordinary diode at frequencies above 100 MHz. Which of the above statements are correct?
If current of a diode changes from 1mA to 10mA what will be the change in voltage across the diode. The ideality factor of diode is 1.2.