Bissoy.com
Doctors Medicines MCQs Q&A

Which one of the following is the correct quantity of zinc sulphate required to prepare 100 litres of 200 ppm solution for foliar spray? Quantity of zinc sulphate required (in grams)

Which one of the following is the correct quantity of zinc sulphate required to prepare 100 litres of 200 ppm solution for foliar spray? Quantity of zinc sulphate required (in grams) Correct Answer 20

To calculate the quantity of zinc sulphate required, we use the formula:
Quantity (in grams) = Concentration (in ppm) × Volume (in liters) ÷ 1000

Given that the concentration is 200 ppm and the volume is 100 liters, we can calculate:
Quantity (in grams) = 200 ppm × 100 liters ÷ 1000 = 20 grams

Therefore, the correct answer is:
D. 20 grams

Related Questions

Given below are quantities named A,B and C. Based on the given information, you have to determine the relation between the quantities. You should use the given data and your knowledge of mathematics to choose among the possible answer. A milkman has 132 litres mixture of milk and water in a container which contains milk and water in the ratio 7 : 5. The milk man sold 48 litres of the mixture and added 6 litres of pure milk and 20 litres of water to the remaining mixture. The milkman again sold 42 litres of the mixture. Quantity A: Find the quantity of milk left in the container. Quantity B: Find the quantity of water left in the container. Quantity C: 35 litres.
A milk seller bought certain quantity of pure milk. He first sold 20 litres of pure milk. He added 20 litres of water to the remaining quantity of milk. He then sold 20 litres of the milk water mixture and added 20 litres of water to the mixture. He again sold 20 litres of this milk water mixture and added 20 litres of water to the mixture. Now, the ratio of milk to water is 8 : 19. How much quantity of pure milk in litres did he buy in the first place?
A chemical solution appears green when the salt concentration is 8 grams per litre (gpl) and red when it is 10 gpl. Pure water was added to the solution of 1 litre of 15 gpl solution till it turned green. Then 125 ml of the green solution is taken out and x grams of salt is added to the green solution to make it red. Another 500 ml of the final solution was taken out and y litres of green solution is added to get a resultant solution of concentration 9.6 gpl.  Assume adding salt doesn’t change its volume and find the ratio of x and y. 
Which of the following statements is/are correct? A. Iron can replace zinc from zinc sulphate solution. B. Zinc can replace copper from copper sulphate solution. C. Copper can replace Iron from Iron sulphate solution.
The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is a degasser in this system. Calculate the amount of SBA resin required for the following data. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 Silica: 30 ppm as CaCO3 CO2: 45 ppm as CaCO3 EMA: 100 ppm as CaCO3 Capacity: 37 Kg/m3 Correction factor: 0.9 Flow rate: 35 m3/hr Operation hours: 10 hrs
30 litres of salt solution contains 5% salt. How many litres of water must be added so as to get a resulted solution containing 3% salt? A. 20 litres B. 25 litres C. 30 litres D. 35 litres
A vessel contains a mixture of Grape, Pineapple and Banana juices in the respectively ratio of 4 : 6 : 5. 15 litres of this mixture is taken out and 8 litres of grape juice and 2 litres of pineapple juice is added to the vessel. If the resultant quantity of grape juice is 10 litres less than the resultant quantity of pineapple juice, what was the initial quantity of mixture in the vessel ? ( in litres)
There is a 40 litre solution of milk and water with concentration of milk as 30%. 10 litres of the solution is replaced with 10 litres of water. After some time, 10 litres of the new solution is replaced with 10 litres of milk. What is the concentration of milk in the solution now?
The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is no degasser in this system. Calculate the amount of resin required for the following information. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 Silica: 45 ppm as CaCO3 CO2: 45 ppm as CaCO3 Capacity: 37 Kg/m3 Correction factor: 0.9 Flow rate: 35 m3/hr Operation hours: 10 hrs
When 12 litres of water were added with some quantity of pure watermelon juice then the ratio of juice to water become 5 : 4 Quantity I: In the mixture, when 2 litres of pure watermelon juice are added then what will be the concentration of juice in the new mixture?  Quantity II: Instead of 12 litres of water, if 5 litres of water were added and the quantity of pure watermelon juice remained the same then what would be the concentration of pure watermelon juice  in the mixture?