Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Identify the correct statements from the following:
P. 0.2% yield strength of a material implies 0.2% of the yield strength.
Q. Von-Misses yield criterion implies that yielding occurs when the distortion energy reaches a critical value.
R. Radius of the cylinderical Von-Misses yield surface increases as the grain, size of a single phase material decreases.
S. Tresca's yield criterion gives a circular cylinderical surface in the space of the three principal stresses.
The largest size of immobilised segment of dislocation in a Frank Read (FR) source contained in a polycrystalline material is of the order of grain size. In a metal of 10 μm grain size, the shear stress required to operate such a FR source is 100 MPa. If the grain size in the same metal is reduced to 10 μm, the shear stress required to operate such FR source would be . . . . . . . . MPa.
In order to double its yield strength, the grain size of a steel of ASTM grain size number 2 should be changed to ASTM grain size number (neglect friction stress)
The yield strenght of a polycrystalline metal increases from 100 MPa to 145 MPa on decreasing the grain size from 64 μm to 25 μm. The yield strenght of this metal (in MPa) having a grain size of 36 μm is
Yield strength of a polycrystalline metal with an average grain size, d, is proportional to
Yield strength of a polycrystalline metal with an average grain size d, is proportional to
Consider the following statements: 1. If x is directly proportional to z and y is directly proportional to z, then (x2 - y2) is directly proportional to z2. 2. If x is inversely proportional to z and y is inversely proportional to z, then (xy) is inversely proportional to z2. Which of the above statements is/are correct?
Kamala has three cylindrical containers, each with radius 20 cm that she wants to fill with grain. If her bag of grain contains 100 kg of grain, and she fills all three containers to a height of 70 cm, how much grain will be left in the bag, if 1 kg grain occupies 3000 cm3 space? (Use π = \(\frac{{22}}{7}\))
The yield strength of a material is 200MPa when the grain size is 80 micron. If the frictional stress is 80MPa, find the strength when the grain diameter is 160 micron?
An ASTM grain size determination is being made from a photomicrograph of a metal at a magnification of 1X. What is the ASTM grain size number of the metal if there are 992 grains per square mm?