Bissoy.com
Doctors Medicines MCQs Q&A

Air of 20.8% O2, concentration enters a coal mine panel at 20 m3/s and exits with 20.6% O2. The oxygen depletion is due to oxidation of carbon in spontaneous heating process only, assuming the density of oxygen as 1.3 kg/m3 and the calorific value of carbon as 34 MJ/kg, the heat generated in kW from the panel due to spontaneous oxidation is

Air of 20.8% O2, concentration enters a coal mine panel at 20 m3/s and exits with 20.6% O2. The oxygen depletion is due to oxidation of carbon in spontaneous heating process only, assuming the density of oxygen as 1.3 kg/m3 and the calorific value of carbon as 34 MJ/kg, the heat generated in kW from the panel due to spontaneous oxidation is Correct Answer 663

Related Questions

Which of the following statements is correct regarding the oxidation number of Oxygen? I. The oxidation number of Oxygen in most compounds is -2. II. When Oxygen is bonded to Fluorine in compounds like Oxygen difluoride and Dioxygen diflouride, the Oxygen is assigned an oxidation number of +2 and +2 respectively. III. In peroxide, an Oxygen atom is assigned an oxidation number of -1 and in Superoxide, each oxygen atom is assigned an oxidation number of -1/2.
Network 206.143.5.0 was assigned to the Acme Company to connect to its ISP. The administrator of Acme would like to configure one router with the commands to access the Internet. Which commands could be configured on the Gateway router to allow Internet access to the entire network?
1. Gateway (config) # ip route 0.0.0.0 0.0.0.0 206.143.5.2
2. Gateway (config) # router rip
3. Gateway (config-router) # network 206.143.5.0
4. Gateway (config-router) # network 206.143.5.0 default
A mine ventilation system consists of two splits A and B with resistances of 0.8 Ns2m-8 and 3.2 Ns2m-8, respectively as shown in figure. Trunk airways have resistance of 0.2 Ns2m-8. The main mine fan is generating pressure of 500 Pa.
Mine Ventilation mcq question image
The air quantities in m3/s circulated in the splits A and B respectively are
Four mines A, B, C and D are located along a road as shown with production in Mt per year 1, 2, 1 and 3 respectively. In order to handle total coal produced. the ideal distance of a coal washery along the road from the mine A in Km is
Mine System Engineering mcq question image
A pumping station in a mine has 4 pumps, P1, P2, P3 and P4 which are connected functionally in parallel configuration as shown in the figure. The individual reliability of the pumps P1, P2, P3 and P4 are 0.80, 0.90, 0.85 and 0.95 respectively. For an effective dewatering operation in the mine denoting system success, at least three pumps should be in operation. The reliability of the system is
Mine System Engineering mcq question image
A main fan of a mine circulates 40 m3/s of air at a pressure of 500 Pa. the mine has two splits of equal resistance. The trunk airways have a total resistance of 0.2 Ns2/m8. When a booster fan is installed in one split, the flow of air in the other splits stops. Assuming that the pressure remains unchanged, the new air quantity flowing through the mine in m3/s is
A mine ventilation system consists of two splits A and B with resistances of 0.8 Ns2m-8 and 3.2 Ns2m-8, respectively as shown in figure. Trunk airways have resistance of 0.2 Ns2m-8. The main mine fan is generating pressure of 500 Pa.
Mine Ventilation mcq question image
The flows in the two splits are equalized by placing a booster fan in split B. Assume that the fan pressure does not change after installation of the booster fan. The size of the booster fan in Pa is
An O.C. mine requires 16 blocks of overburden of 3000 te each to mine 4 blocks of coal of 2000 te each. The mining cost of both overburden and coal is Rs. 50 per tonne. The cost of transportation of overburden to dump areas is Rs. 50 per tonne. Coal transportation cost to the selling point is Rs. 75 per tonne. The price of coal is Rs. 800 per tonne, If the royalty and tax to the state is Rs. 50 per tonne, the nominal profit in rupees is
The sensible heat factor during the heating and humidification process is given by (where h₁ = Enthalpy of air entering the heating coil, h₂ = Enthalpy of air leaving the heating coil, and hA = Enthalpy of air at the end of humidification process)
The sensible heat factor during the heating and humidification process is given by (where h1 = Enthalpy of air entering the heating coil, h2 = Enthalpy of air leaving the heating coil and hA = Enthalpy of air at the end of humidification process)