Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements regarding clutches 1. Dry clutch has higher coefficient of friction compared to wet clutch 2. The torque capacity of wet clutch is high compared to dry clutch. 3. The engagement in a dry clutch is smoother than in case of wet clutch. Which of the above statements is/are correct ?
A set of jobs A, B, C, D, E, F, G, H arrive at time t = 0 for processing on turning and grinding machines. Each job needs to be processed in sequence - first on the turning machine and second on the grinding machine, and the grinding must occur immediately after turning. The processing times of the jobs are given below. Job A B C D E F G H Turning (minutes) 2 4 8 9 7 6 5 10  Grinding (minutes)  6 1 3 7 9 5 2 4 If the makespan is to be minimized, then the optimal sequence in which these jobs must be processed on the turning and grinding machines is
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 10 mm between the shoe and the rim. The pull exerted by the spring is then 700 N. The mass centre of the shoe is 150 mm from the axis of the clutch. If the internal diameter of the rim is 500 mm, the mass of each shoe is 6 kg, the stiffness of each spring is 75 N/mm and the coefficient of friction between the shoe and the rim is 0.35; find the power transmitted by the clutch at 400 r.p.m.
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 7.5 mm between the shoe and the rim. The pull exerted by the spring is then 600 N. The mass centre of the shoe is 120 mm from the axis of the clutch. If the internal diameter of the rim is 350 mm, the mass of each shoe is 5 kg, the stiffness of each spring is 60 N/mm and the coefficient of friction between the shoe and the rim is 0.2; find the speed of the centrifugal clutch, if the power transmitted is 40.168 kW.
Which one of the following four addresses is NOT EXACTLY same as the one given below? Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (i) Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (ii) Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (iii) Cabrematta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia (iv) Cabramatta 360 Elizabeth Drive, 2170 Mount Pritchard, Australia
Which one of the following four addresses is NOT EXACTLY same as the one given below?  Kedrick Shaw 72 Glenwood Drive, Thornton, NSW 2322, Australia (i)  Kedrick Shaw  72 Glenwood Drive,  Thornton, NSW 2322, Australia (ii) Kedrick Shaw  72 Glenwood Drive,  Thornton, NSW 2322, Australia (iii) Kedrick Shaw  72 Glenwood Drive,  Thornton, NSW 2322, Australia (iv) Kedrick Shaw  72 Glemwood Drive,  Thornton, NSW 2322, Australia
Which one of the statement is correct?
1. Petrol engine is a reciprocating engine
2. Petrol engine is high speed engine
3. Petrol engine uses petrol as fuel
4. Petrol engine is internal combustion engine
Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation?
1. Fluid flow is frictionless & irrotational
2. Fluid flow is steady
3. Fluid flow is uniform & turbulent
4. Fluid is compressible
5. Fluid is incompressible
Read the passage carefully and choose the best answer to each question out of the four alternatives.
Eight north Indian Ocean countries, namely, Bangladesh, India, the Maldives, Myanmar, Oman, Pakistan, Sri Lanka and Thailand, were asked to contribute names so that a combined list could be compiled. Each country gave eight names and a combined list of 64 names was prepared. This list is currently in use, and all cyclones arising in the north Indian Ocean are named from this list, with one name from each country being used in turn. Almost 38 or 39 names from the list have been used up, but since many cyclones dissipate long before they hit land, their names rarely figure in the papers or other media. The names that people do know about, and remember are, naturally, those that were most destructive ones, or very recent. Aila, in 2009 is remembered with a shudder for the enormous destruction it caused in West Bengal and Bangladesh; Phaillin, also for the damage it caused when it hit the Odisha coast in 2013. Two harmless cyclones, which also might remain in peoples memory, are the more recent ones of 2014 — Hudhud, which threatened the east coast of India and Nilofar, which was expected to, but did not, devastate the western coast. The names in the cyclone list are usually words one associates with storms; words which mean water or wind or lightning in various national languages. Sometimes they are names of other things — birds or flowers or precious stones. The name Aila, contributed by the Maldives means fire, the name Phaillin from Thailand means sapphire, the name Hudhud from Oman is the name of a bird, probably the hoopoe, and the name Nilofar, given by Pakistan, is the Urdu name of the lotus or water lily. The eight names suggested by India, and which are in the list of 64, are Agni, Akaash, Bijli, Jal, Leher, Megh, Sagar and Vayu, meaning in that order, fire, sky, lightning, water, wave, cloud, sea and wind. Five of these names (that is, up to Leher) have been used so far.
For the next cyclone if it is the turn of an Indian name to be chosen, then what will be that name?
How does a host on an Ethernet LAN know when to transmit after a collision has occurred?
1. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.
2. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting.
3. You can improve the CSMA/CD network by adding more hubs.
4. After a collision, the station that detected the collision has first priority to resend the lost data.
5. After a collision, all stations run a random backoff algorithm. When the backoff delay period has expired, all stations have equal priority to transmit data.