Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Out of 150 pilots who can fly either Airbus 310 or Airbus 320, 75% can fly Airbus 310 and out of total pilots who can fly Airbus 310, 20% can also fly Airbus 320, then how many pilots can fly Airbus 320?
Each of the following problem has a question and two statements which are labeled 1. and. Use the data given in 1. and 2. to decide whether the statements are sufficient to answer the question.Select one of the following . a.Statements (1) ALONE is sufficient,but (2) ALONE is not sufficient. b.Statements (2) ALONE is sufficient,but (1) ALONE is not sufficient. c. Both statement TOGETHER are sufficient but statement alone is sufficient . A fly crawls around the outside of a circle once.A second fly crawls around the outside of a square once.Which fly travels further ? (1) The diagonal of the square is equal to the diagonal of the circle.(2) The fly crawling around the circle took more time to complete has journey than the fly cawing around the square.
With reference to 'fly ash' produced by the power plants using coal as fuel, which of the following statements is/are correct? 1. Fly ash can be used in the production of bricks for building construction. 2. Fly ash can be used as a replacement for some of the Portland cement contents of concrete. 3. Fly ash is made up of silicon dioxide and calcium oxide only, and does not contain any toxic elements. Select the correct answer using the code given below
The circumference of the back-sided wheel of a vehicle is 1 m greater than that of front side wheel. To travel 600 m, the front wheel rotates 30 times more than the back wheel. The circumference of the front wheel is :
Water, having a density of 1000 kg/m3, leave from a nozzle with a velocity of 10 m/s and the jet strikes a bucket mounted on a Pelton wheel. The wheel rotates at 10 rad/s. The mean diameter of the wheel is 1 m. The jet is split into two equal streams by the bucket, such that each stream is deflected by 120°, as shown in the figure. Friction in the bucket may be neglected. Magnitude of the torque exerted by the water on the wheel, per unit mass flow rate of the incoming jet, is
Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation?
1. Fluid flow is frictionless & irrotational
2. Fluid flow is steady
3. Fluid flow is uniform & turbulent
4. Fluid is compressible
5. Fluid is incompressible
In case of three-phase dual converter, one of the converter circuits is fired at an angle of 60°. For both the converter circuits to have equal average output voltage, what is the value of the firing angle for the other converter circuit?
A circular wheel 28 inches in diameter rotates the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minutes does the larger wheel make in terms of x?
A wheel that has 6 cogs is meshed with a wheel of 14 cogs. When the smaller wheel has made 21 revolutions the number of revelution made by the larger wheel is --
A circular wheel 28 inches in diameter rotates (moves) the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minute does the larger wheel make in terms of x?