Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
The ratio of men and women in shift I workers is 1 : 3 and ratio between the women and men in shift II workers is 2 : 3. When both shift workers are present then ratio between the men and women is 23 : 27. Find the ratio between the men of shift II and shift I.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is
The shift register shown in the figure is initially loaded with the bit pattern 1010. Subsequently, the shift register is clocked, and with each clock pulse the pattern gets shifted by a one-bit position to the right With each shift, the bit at the serial input is pushed to the leftmost position (MSB) After how many clock pulses will the content of the shift register become 1010 again?
There are six people Kirti, Kavita, Komal, Khushi, Koel and Kritika, who got different positions in a competition. Kavita got second position while Khushi got third position from the last. Komal’s position was immediately after Kavita and immediately before Khushi. Koel does not get either the first position or the last position. Kirti also does not get the last position. Who got the last position?
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the tangential gear tooth force. Module of the gear is 5mm.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the tangential component of gear tooth force.
There are seven persons Amit, Roshan, Ravi, Priya, Amrita, Arpita and Mitul. They participated in a competition where they got different positions. Amit scored the first position while Mitul scored the last position. Priya scored fourth position from the last. Ravi scored one position higher than Priya while Amrita scored one position lower than Priya. Roshan scored higher position than five of them. Who scored the second lowest position?