Related Questions

Consider a deep-space probe constructed as 1 m diameter polished aluminum sphere. Estimate the equilibrium temperature that the probe reaches if the solar energy received is 300 W/m2. For solar radiation, absorptivity of aluminum is 0.3 and the average emissivity appropriate for aluminum at low temperature is 0.04
In magnesium alloys, what is the maximum amount of allowed aluminum?
Tin-base alloys are replaced by aluminum-base alloys due to _______
A and B are two alloys of gold and copper prepared by mixing metals in the ratio 5 : 3 and 5 : 11 respectively. Equal quantities of these alloys are melted to form a third alloys C. The ratio of gold and copper in the alloy C is -
Magnesium alloys can be made into ___________ sophisticated structures compared to aluminium alloys.
In an alloy, zinc and copper are in the ratio 1 : 2. In the second alloy, the same elements are in the ratio 2 : 3. If these two alloys be mixed to form a new alloy in which two elements are in the ratio 5 : 8, the ratio of these two alloys in the new alloys is -
What is the order of elastic modulus for Nickel alloys, Lead alloys, Molybdenum alloys, alumina?
Magnesium and its alloys are suitable to use in the construction of helicopters.
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The Alaska pipeline starts at the frozen edge of the Arctic Ocean. It stretches southward across the largest and northernmost state in the United States, ending at a remote ice-free seaport village nearly 800 miles from where it begins. It is massive in size and extremely complicated to operate. The steel pipe crosses windswept plains and endless miles of delicate tundra that tops the frozen ground. It weaves through crooked canyons, climbs sheer mountains, plunges over rocky crags, makes its way through thick forests, and passes over or under hundreds of rivers and streams. The pipe is 4 feet in diameter, and up to 2 million barrels (or 84 million gallons) of crude oil can be pumped through it daily. Resting on H-shaped steel racks called "bents", long sections of the pipeline follow a zigzag course high above the frozen earth. Other long sections drop out of sight beneath spongy or rocky ground and return to the surface later on. The pattern of the pipeline's up-and-down route is determined by the often harsh demands of the arctic and subarctic climate, the tortuous lay of the land, and the varied compositions of soil, rock, or permafrost (permanently frozen ground). A little more than half of the pipeline is elevated above the ground. The remainder is buried anywhere from 3 to 12 feet, depending largely upon the type of terrain and the properties of the soil. One of the largest in the world, the pipeline cost approximately $8 billion and is by far the biggest and most expensive construction project ever undertaken by private industry. In fact, no single business could raise that much money, so 8 major oil companies formed a consortium in order to share the costs. Each company controlled oil rights to particular shares of land in the oil fields and paid into the pipeline-construction fund according to the size of its holdings. Today, despite enormous problems of climate, supply shortage, equipment breakdowns, labour disagreements, treacherous terrain, a certain amount of mismanagement, and even theft, the Alaska pipeline has been completed and is operating.
How was the fund for pipeline - construction generated?
An alloy contains the copper and aluminum in the ratio of 7 : 4 While making the weapons from this alloy, 12% of the alloy got destroyed. If there is 12 kg of aluminum in the weapon, then weight of the alloy required is :