Related Questions

The metal suitable for bearings subjected to light loads, is
A Silicon bronze
B White metal
C Monel metal
D Phosphor bronze
The metal suitable for bearings subjected to light loads is
A Silicon bronze
B White metal
C Monel metal
D Phosphor bronze
The rolling contact bearings as compared to sliding contact bearings have
A Low starting and low running friction except at very high speeds
B Accuracy of shaft alignment
C Small overall dimensions
D All of the above
What type of bearing is used for main bearings and connecting rod bearings?
A Ball bearings
B Plain bearings
C Needle roller bearing
D Taper roller bearing
The metal suitable for bearings subjected to heavy loads, is
A Silicon bronze
B White metal
C Monel metal
D Phosphor bronze
The metal suitable for bearings subjected to heavy loads is
A White metal
B Silicon bronze
C Monel metal
D Phosphor bronze
Tin based white metals are used, where bearings are subjected to
A High pressure & load
B Low pressure & load
C High temperature
D Large surface wear
When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
A Is at the maximum distance from CG of the rivet group
B Is at the minimum distance from CG of the rivet group
C Gives the maximum angle between the two forces Fa and Fm
D Gives the minimum angle between the two forces Fa and Fm
In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed
A 10 mm
B 15 mm
C 20 mm
D 25 mm
In a spherical dome subjected to concentrated load at crown or uniformly distributed load, the meridional force is always
A Zero
B Tensile
C Compressive
D Tensile or compressive

Next steps