Related Questions

Thermal conductivity based continuous flue gas analyser makes use of varying thermal conductivity of the constituents of flue gases. Which of the following constituents of flue gases has the maximum thermal conductivity?
A CO2
B N2
C O2
D CO
The ratio of the energy required to produce the artificial draught (expressed in meters head or J/kg of flue gas) to the mechanical equivalent of extra heat carried away per kg of flue gases due to natural draught, is known as
A Efficiency of the boiler
B Efficiency of the chimney
C Efficiency of the fan
D Power of the boiler
Open channel liquid flow is most conveniently measured by a
A Hot wire anemometer
B Notch
C Rotameter
D Segmental orifice
Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec.
A 0.5
B 500
C 10
D 50
In convection heat transfer from hot flue gases to water tube, even though flow may be turbulent, a laminar flow region (boundary layer of film) exists close to the tube. The heat transfer through this film takes place by
A Convection
B Radiation
C Conduction
D Both convection and conduction
Smoke density of the flue gas going out of the chimney is measured by a
A Polarograph
B Thermal conductivity meter
C Photo electric cell
D Chromatograph
With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop
A Decreases
B Remains unchanged
C Increases
D Decreases exponentially
Water flows into an empty 64-gallon drum through pipe A and flows out through pipe B. If the rate of flow through A is 2 gallons/hour, how many gallons per hour must flow out through pipe B so that the drum is full in exactly 96 hours?
A 3/8
B 1/2
C 2/3
D 4/3
Flow rate of those fluids which are insensitive to changes in their density, viscosity or flow velocity profile can be best measured by a
A Magnetic flowmeter
B Pitot tube
C Flow nozzle type flowmeter
D Turbine flowmeter
In which of the waste heat recovery equipment, the flow of flue gas and air is alternately reversed after a fixed interval of time?
A Recuperator
B Regenerator
C Waste heat boiler
D None of these

Next steps